Abstract:A method of improving the capacity of reinforced concrete T-beams using profiles made of hybrid basalt-carbon fiber sheetreinforced polymer (HFRP) bonded to concrete using three different methods was researched. Various basalt-carbon ratios were considered, along with three types of different bonding interfaces. The flexural performance of the HFRP-RC (reinforced concrete) composite T-beams with different interfaces was studied by both experimental and theoretical analysis methods, the main areas of focus including the feasibility of the interface type, failure mode of these beams, load capacity, flexural stiffness, and ductility, among others. Three types of interface were studied by both the double-lap shear test and the four-point bending test of beam specimens. Good bond behavior can be achieved with the three methods and the additional anchorage system. The hybrid effect of hybrid fiber sheets made of basalt fiber (BFRP) and carbon fiber (CFRP) was studied both by a tensile test of hybrid fiber sheets and by a four-point bending test. A constitutive relationship of hybrid fiber sheets was put forward in which an improvement factor of the CFRP ultimate strain value was introduced according to the result of the material and checked by the beam test results. Meanwhile, the HFRP-RC beams were found to have an obvious postyield stiffness, which can control the structure deformation after the yield of steel bars. The postyield stiffness formula for the HFRP-RC beams is given, and its precision was checked by using both the test results and the literature results. Finally, the ductility of these beams was studied and results show that these kinds of beams can have adequate energy ductility. (C) 2016 American Society of Civil Engineers.

Experiment on Hybrid Fiber Reinforced Plastic Beam

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental Study on Bending Performances of Hybrid FRP-concrete Composite T-beams

STUDY ON DEFLECTION THEORY OF HYBRID REINFORCED PLASTICS BEAM

Experimental study of mechanical properties of CFRC composite beams

Flexural Performance of Hfrp-Rc Composite T-Beams with Different Interfaces

Research on the Flexural Behavior of Polypropylene Fiber Reinforced Concrete Beams with Hybrid Reinforcement of GFRP and Steel Bars

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents

Study on Flexural Behavior of Timber Beams Strengthened with FRP

Experimental Study of Flexural Fatigue Performance of Reinforced Concrete Beams Strengthened with Prestressed CFRP Plates

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF HYBRID FIBER REINFORCED SELF-COMPACTING CONCRETE BEAMS

Effect of Hybrid Fibers on Bending Capacity of High-Performance Concrete Deep Beams

Effect of Fiber Volume Ratio on Flexural Behavior of RC Beam with Novel HFRP Rebar and Steel Rebar

ENHANCEMENT OF FLEXURAL PERFORMANCES THROUGH FRP HYBRIDIZATION WITH HIGH-MODULUS TYPE CARBON FIBERS

Fatigue behavior of reinforced concrete beams strengthened with prestressed fiber reinforced polymer

Experimental study of GFRP-concrete hybrid beams

Flexural Behavior of Reinforced Concrete Beams Strengthened with Hybrid Carbon-Pet FRP Laminates

Experimental Study on the Flexural Behavior of Concrete Beam Hybrid Reinforced with FRP Bars and Steel Bars

Experiment of RC Beams Strengthened with Near-Surface Mounted Carbon Fiber Reinforced Plastic Bar and Pre-Stressed Helical Rib Rebar