Abstract:For halide salt-ammonia working pairs, thermal conductivity and permeability always change with the adsorption/desorption concentration because of swelling and agglomeration phenomena during the processes of complexation and decomposition. Correspondingly, heat and mass transfer performance, which both affect the adsorption refrigeration performance, will be influenced. To provide an overview of the process mentioned above, solidified composite adsorbents that utilize expanded natural graphite (ENG) as the matrix were developed for eight different salts. Thermal conductivity and permeability were investigated for three different ratios between ENG and salt in the ammoniating process. The resulting data were compared with the data for the adsorbents that did not adsorb ammonia. The results indicate that the thermal conductivity and permeability of ammoniated salts have a strong dependence on the salt ratio and the consolidated density of the compound adsorbent. In regard to the adsorbent that was not adsorbed, the optimal thermal conductivity was 1.73 W/(m K) for the adsorbent of CaCl2-ENG with a density of 550 kg/m(3) when the salt ratio was 75%. The optimal permeability was 9.02 x 10(-11) m(2) for the adsorbent of BaCl2-ENG with a density of 450 kg/m(3) when the salt ratio was 83% in converging mode. Furthermore, the thermal conductivity and permeability of the compact compound ammoniated salts varied significantly with different concentrations of ammonia. The largest increase in thermal conductivity was as high as 1.25 W/(m K)during the adsorption process, whereas the largest decrease in permeability was as high as 5.08 x 10(-11) m(2) for different adsorption states. For the different adsorption working pairs, the thermal conductivity and permeability ranged from 0.62 to 2.98 W/(m K) and 1.47 x 10(-14)-8.13 x 10(-11) m(2), respectively. (C) 2013 Elsevier Masson SAS. All rights reserved.

The Measurement of Thermal Conductivity of Compound Adsorbent Used by Thermal Probe

Thermal conductivity measurement of phase-change material near melting point based on perturbation method

Investigation on Thermal Conductive Consolidated Composite CaCl2 for Adsorption Refrigeration

Investigation of Thermal Characteristics of Strontium Chloride Composite Sorbent for Sorption Refrigeration

Permeability and Thermal Conductivity of Compact Adsorbent of Salts for Sorption Refrigeration

Investigation on Thermal Characteristics of Novel Composite Sorbent with Carbon Coated Iron As Additive

Performance Analysis on Open Thermochemical Sorption Heat Storage from a Real Mass Transfer Perspective

MEASUREMENT OF THERMAL CONDUCTIVITY OF SILICA GEL AND COMPOSITE ADSORBENT BY USING TRANSIENT PLANE SOURCE TECHNIQUE

Fabrication and Thermal Conductivity Improvement of Novel Composite Adsorbents Adding with Nanoparticles

Experiment on the Thermal Conductivity and Permeability of Physical and Chemical Compound Adsorbents for Sorption Process

Thermal Conductivity Measurement of the CaCl2/ Expanded Graphite Compound Asorbent

Effective Thermal Conductivity and Permeability of Compact Compound Ammoniated Salts in the Adsorption/Desorption Process

The Measurement Of Thermal Conductivities Of Solid Fruits And Vegetables

The Principle To Measure Thermal Conductivity By A New Thermal Probe Method

Performance of Novel 13X Zeolite Based Refrigerant Compound Adsorbent

Study on the Thermal Conductivity and Permeability of Composite SrCl2-NH3 Working Pair under the Condition of Different Values for Adsorption Quantity

Experimental Research and Investigation on the Heat Conductivity of Thermal Adsorption Refrigeration Materials

Accurate Measurements of Thermal Conductivity and Thermal Diffusivity of Molten Carbonates

EXPERIMENTAL STUDY ON THE ADSORPTION AND HEAT TRANSFER PERFORMANCE OF ZEOLITE-WATER WORKING PAIR

Sensitivity Analysis Of Sensor Probe For Low Thermal Diffusivity Properties Measurement

Effective thermal conductivity of expanded graphite–CaCl2 composite adsorbent for chemical adsorption chillers