Abstract:An organic/inorganic support of immobilizing catalysts for ethylene polymerization was devised. The composition of the hybrid catalyst is as following: styrene and acrylic copolymer (PSA) is the organic part for binding iron (III) acetylacetonate and his(imino) pyridyl ligand catalyst,and SiO2, (Davison 955 silical gel) is the inorganic part. The inorganic part is coated by the organic part (PSA) by sol-gel method. The catalyst could produce not only high crystallinity (72%) polyethylene,but also alpha-olefin. We considered the impact of different membrane materials and polymerization conditions (different cocatalyst, pressure, temperature, Al/Fe molar ratio) to the polymerization activity and properties of polymers and found that temperature had the greatest impact to the weight ratio of oligomer to PE. Because of the poor thermal stability of catalyst, the catalytic activity significantly attenuated with increasing temperature. When pressure increased, catalytic activity would increase too. The relationship of pressure and catalytic activity met the cossee catalytic reaction mechanism, which was widely accepted in Ziegler-Natta catalyst ' s ethylene polymerization mechanism. Different membrane materials would affect the final polyethylene product performance, the pure PSA as organic part would increase the molecular weight significantly. Cocatalysts affect not only the catalytic performance,but also the property of the final product. The alkylaluminium as cocatalyst tended to decrease the molecular weight. The iron catalyst system binding on the PSA after the treatment of magnesium chloride could produce the polyethylene of lower molecular weight (M-w = 11. 9 x 10(4)) and higher crystallinity (72%). And the polyethylene s melt index MI (2. 35 g/10min) was higher than the iron catalyst binding on other membrane materials. The polyethylene can be used as the low molecular weight part of bimodal polyethylene.

Esterification Synthesis Methylacrylic Acid Polyethylene Glycol Single Methyl Ether (400) Ester

SYNTHESIS OF AROMATIC POLYESTERS FROM ESTERS OF DIPHENOLIC ACID AND ISOPHTHALOYL CHLORIDE BY INTERFACIAL POLYCONDENSATION

Studies on Synthesis of Cyclohexanone Diethyl Acetal

Technical Conditions of Synthesizing 5-Bromo-2-hydroxy-3-(1-propionyl) Benzoic Acid Methyl Ester

Synthesis of Semi-Aromatic Copolyester with High Molecular Weight

Preparation of functional ethoxysilane-containing polyethylene through ethylene coordination copolymerization catalyzed by iminopyrrolide vanadium complex

Synthesis of Methoxy Polyethylene Glycol Monomethacrylate Ester

High Molecular Weight Soybean Oil-based Polyesters through Carboxyl-ester Transesterification

Catalyst-free synthesis of polyesters via conventional melt polycondensation

High Molecular Weight Biodegradable Poly(Ethylene Glycol) Via Carboxyl-Ester Transesterification

Separation Of Epimeric Aromatic Acid (-)-Menthol Esters By Countercurrent Chromatography Using Hydroxypropyl Beta-Cyclodextrin As An Additive

Reaction–Thin Film Evaporation Coupling Technology for Highly Efficient Synthesis of Higher Alkyl Methacrylate

Synthesis of Polymerizable Methyl Acryloyl Oxygen Propyl Phosphate Ester

SYNTHESIS AND PROPERIES OF POLY(AROMATIC ETHER KETONE KETONE ETHER KETONE KETONE)CONTAINING CARBOXYLIC ESTER SIDE GROUPS

Organic/Inorganic Support for Immobilizing Iron (iii) Acetylacetonate and Bis(Imino)Pyridyl Ligand Catalyst System for Ethylene Polymerization

Study on the new synthesis method of n-caprylic acid esterification

Synthesis of Macromonomer MPEGAA and Its Copolymer

Synthesis and Characterization of a Poly(acrylic Acid)‐graft‐methoxy Poly(ethylene Oxide) Comblike Copolymer

Combination of Ethylene, 1,3-Butadiene, and Carbon Dioxide into Ester-Functionalized Polyethylenes Via Palladium-Catalyzed Coupling and Insertion Polymerization

Optimization Of Epoxidized Methyl Acetoricinoleate Synthesis By Response Surface Methodology

Synthesis and Property Study of Glycol Glucoside Polyoxypropylene Ether