Abstract:Friction-induced vibration emanating from aircraft braking system is a key issue in the design phase, due to the significant damage it can cause to the brake structure. Although the problem of unstable vibrations in aircraft braking systems has been studied by a number of researchers, the suitability of the mechanical modeling strategy for predicting instabilities remains an open problem. The need for relevant numerical models is therefore essential in order to be as predictive as possible during the design phase. Preliminary studies must therefore be carried out to validate or invalidate the modeling hypotheses traditionally used. Indeed the stability analysis of an aircraft braking system is performed in order to study a low-frequency instability. An industrial model is used, hence reducing the number of degrees of freedom (DoF) is of utmost importance in order to have reasonable computation times. When studying low-frequency phenomena, this can be achieved by neglecting the deformations of the disks. However, no current study has shown that this hypothesis is realistic. So the aim of this paper is to assess the effect of the rigidity hypothesis on the results predicted by the stability analysis. In order to do so, the stability analysis results of a model with rigid disks and one with non-rigid disks are compared, with a particular attention on the main instability phenomenon. It is found that considering rigid disks has a very limited influence on the frequency of the low-frequency eigenmodes, but it over-predicts the real part of the unstable eigenmode. Besides, a component mode synthesis (CMS) technique is shown to reduce significantly the size of the non-rigid disks model while ensuring a satisfying precision regarding eigenmodes prediction.

Stability of low frequency vibration of the non-linear model for drum-brakers

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Research on Modeling and Load Simulation Algorithm of Tracked Vehicle Braking System on Mu-Split Road Surfaces

Dynamic modeling and brake stick-slip vibration analysis of a vehicle-track system with disc-pad nonlinear frictions

The influence of disks deformation on the stability analysis of an aircraft braking system

Nonlinear Behavior Evolution and Squeal Analysis of Disc Brake Based on Different Friction Models

Disc Brake Vibration Model Based on Stribeck Effect and Its Characteristics under Different Braking Conditions

A novel dynamics model of a trailer bogie brake system and its application in stability analysis

Model Reduction of a Continuous System with Friction-Induced Vibration Considering Separation and Re-Contact

Center manifold and multivariable approximants applied to non-linear stability analysis

Influence of Two External Excitations for Brake Stick-Slip Behavior Using New Numerical Calculation Method

On the Coupling Stiffness in Closed-Loop Coupling Disc Brake Model Through Optimization

On the Effect of Friction Law in Closed-Loop Coupling Disc Brake Model

Dynamic Instability of Rigid Shoe Modes in a Drum Brake System

Bounded Time-Delay Control Performance of Two-Degree-of-freedom Nonlinear Vehicle System under Random Road Excitation Using MR Damper

Optimization Design of Drum Brake Stability with Mixed Model of Random and Interval Variables

The Vibration and Modal Analysis of the Disc Brake

Research on cold mechanical vibration of air-cooled disc brake

Effect of uneven wear on the stability of friction braking system in high-speed train

Theoretical modelling of a vehicle-slab track coupled dynamics system considering longitudinal vibrations and interface interactions

Experimental Investigation and Analysis on Dynamic Strain of Leading Trailing Shoe Drum Brake