Abstract:The stabilization mechanism of nozzle-attached flames in laminar non-premixed jets was studied experimentally and numerically. The local gas flow velocity and the flame propagation speed within the mixing layer at flame base were experimentally obtained before the blowout limit was reached. The experimental results show that, for burner-attached flames, the local flow velocity is much less than the burning speed, suggesting that the propagation of partially premixed flame within the mixing layer at flame base is stopped. The thickness of the fuel/air mixing layer at the attached flame base is quite narrow (1.1-1.5 mm) and less than the minimum quenching distance caused by conductive heat loss to the tube (or slit) wall in laminar premixed flame. Heat losses by the conduction from the flame base to the burner wall, and the convection between the flame base and the incoming flow (hereafter referred to as local convection) were studied through simulation. The significant roles of these effects in the stabilization of the attached flame were analyzed. While the heat loss by conduction to the fuel tube is neglected, the partially premixed flame at flame base can propagate along a much narrower mixing layer. On the contrary, a critical thickness of the mixing layer (in which the local partially premixed flame can sustain) exists near the flame base with considering the conductive heat loss. The conductive heat loss to the burner wall plays a relatively important role to flame stabilization without (or with a small amount of) coflow air. As the velocity of coflow air increases, the heat loss due to local convection gradually exhibits significant effects on flame stabilization. In addition, a simple theoretical model is provided based on the balance between the heat released by chemical reaction and the heat lost by conduction and local convection, suggesting clear dependence of the thickness of the fuel/air mixing layer on the local gas flow velocity and the laminar flame speed. The stability behaviors of flame base can be reasonably explained and predicted through such relation.

Steady Flame Propagation in Micro Pipes

Propagation and Extinction of Premixed Flame in Tubes

Research on Small-Scale Flame Propagation Combustion Mechanism

Numerical Study of Premixed Flame Dynamics in a Closed Tube: Effect of Wall Boundary Condition

Experimental Investigation On Microstructure And Propagation Behavior Of Propane/Air Flame

Laminar flame propagation with volumetric heat loss and chain branching-termination reactions

Investigation of an Unsteady Flame Propagating in a Curved Duct

Study of the Mechanisms of the Flame Propagation and Stabilization in Porous Media

Numerical Simulation of Premixed Propane/Air Flame Propagation Using A Dynamically Thickened Flame Approach

Mathematical Thermo-Mechanical Analysis on Flame-Solid Interaction: Steady Laminar Stagnation Flow Flame Stabilized at a Plane Wall Coupled with Thermo-Elasticity Model

Burning stability analysis of micro-combustion and experimental research of combustion in microscale tube

Stabilization Mechanism of Burner-attached Flames in Laminar Non-premixed Jets

Effects of Radiative Loss on Premixed Planar Flame Propagation

Numerical Investigation on Flame Propagation Characteristics of Non-Premixed Hydrogen and Air in a Curved Micro-Combustor

Experimental and Numerical Investigations on Flame Stability of Methane/air Mixtures in Mesoscale Combustors Filled with Fibrous Porous Media

Effects of Flow Rate and Fuel/air Ratio on Propagation Behaviors of Diffusion H-2/air Flames in a Micro-Combustor

Effects of heat loss at walls on flame acceleration and deflagration to detonat ion transition

An Investigation of Premixed Flame Propagation in a Closed Combustion Duct with a 90° Bend

Premixed Flame Propagation in a Confining Vessel with Weak Pressure Rise

Experimental and Theoretical Study on Splitting Flames in a Circular Micro Tube

An Experimental Study and Analysis on Maximum Horizontal Extents of Buoyant Turbulent Diffusion Flames Subject to Relative Strong Cross Flows