Abstract:As a renewable energy with zero carbon emission, the utilization of biomass has attracted widely studied. One of the most effective methods is to gasify the biomass into high-quality gas fuel. In the recent years, the majority of research on biomass gasification is conducted in the laboratory. However, it lacks the research in engineering application scale. In this work, a biomass gasification-combustion plant was designed and built to provide the industrial steam with a rate of 30 t/h for a food industrial park. The agricultural and forestry waste biomass was gasified in a gasifier, and then the product gas combusted in a boiler to supply the steam. The characteristics of the product gas from the gasifier were studied. The corrosion and pollutants in the combustion process were investigated. In the gasification process, the main components of the product gas are CO, H-2 and CH4. CO and H-2 account for 29.55 vol%-30.56 vol% and 11.65 vol%-15.35 vol%, respectively. The calorific value of the product gas is 5.88-6.29 MJ/m(3). The tar concentration is 110.58-155.07 g/Nm(3). At the outlet of the boiler, the concentration of the filterable particulate matter is 300.25 mg/Nm(3), and the particle size is concentrated at 1.00-2.50 mu m. The concentration of the condensable particulate matter (CPM) is 157.14 mg/Nm(3), and the proportion of water-soluble ions in CPM is 86.36 wt%. The concentration of Cl-, SO42-, NH4+ and Na+ in CPM is relatively high, with the values of 28.83 mg/Nm(3), 10.29 mg/Nm(3), 7.46 mg/Nm(3), and 5.06 mg/Nm(3), respectively. During the half-year running, the ash deposition and corrosion were detected in the boiler heating surface and the economizer. The ash deposit in the boiler is mainly composed of the sulfate and silicate, such as CaSO4, Zn2SO4, Na2SO4 and K3Na(SO4)(2). The ash deposit in the economizer is primarily composed of the sulfate and a small amount of alkali metal chloride. The flue gas reaches the emission requirement after passing through the pollution control devices and can be discharged into the atmosphere.

Comparative Study On The 1mw And 5.5mw Biomass Gasification And Power Generation System

An Economic Analysis of Biomass Gasification and Power Generation in China.

DESIGN AND OPERATION ANALYSIS ON MIDDLE-SIZE BIOMASS GASIFICATION & POWER GENERATION SYSTEM

Operation Performance Study of 1MW Biomass Gasification Electric Energy Generation System

Design and Operation of A 5.5 Mwe Biomass Integrated Gasification Combined Cycle Demonstration Plant

Research on Energy Metering System Based on Biomass Gasification Coupled Power Generation in a 600MW Power Plant

Design and operation of a CFB gasification and power generation system for rice husk

Development Of Gas Steam And Power Multi-Generation System

Test Results and Operation Performance Analysis of a 1-MW Biomass Gasification Electric Power Generation System

Techno-economic evaluation for coal-based polygeneration systems of heat, power, oil and synthetic natural gas

Hybrid life-cycle assessment for energy consumption and greenhouse gas emissions of a typical biomass gasification power plant in China

Study Of Biomass Gasification And Combustion

Comparative Evaluation of Biomass Power Generation Systems in China Using Hybrid Life Cycle Inventory Analysis

Performance Analysis of Biomass Gasification Coupled with Ultra-Supercritical Power Generation System

Status Quo and Developing Trend of the Biomass Gasification Power Generation Technology

Comparative Study on Biomass Power Generation Technologies

A Pilot Study on a 30t/h Biomass Gasification-Combustion Plant

A Pilot Study on a 30 T/h Biomass Gasification-Combustion Plant

Development of a Noval Ultra-small Biomass Gasification and Power Generation System

A Multi-Product Cogeneration System Using Combined Coal Gasification and Combustion

Energy, exergy, exergoeconomic, and environmental analyses and multi-objective optimization of a biomass-to-energy integrated thermal power plant