Abstract:Liquid desiccant dehumidification provides a pathway to high-flow air pretreatment of air compressors for energy savings. However, high air-to-solution flow ratios (i.e., over 4.0) may result in an unacceptable decrease in dehumidification effectiveness, and few studies have managed to overcome this challenge. This study aims to experimentally demonstrate that the multi-stage internally-cooled liquid desiccant dehumidifier (MILDD) is capable of improving the effectiveness at extremely high air-to-solution flow ratios over 10.0. A laboratory bench of the MILDD is designed and tested in various operational conditions. Based on the finite difference model, the experimental results of dehumidification effectiveness are analyzed in terms of the heat and mass transfer process such as irreversible loss and driving forces. The specific cooling capacity associated with the energy efficiency is further studied by considering different desiccant regeneration efficiency. In addition, the experimental latent effectiveness from present and previous work is compared and correlated. Results show that the measured latent effectiveness of the MILDD exceeds 0.42 and goes even up to 1.02 at high air-to-solution flow ratios, i.e., 8.6–20.1, while existing liquid desiccant dehumidifiers maintain a comparable effectiveness only at much lower flow ratios, i.e., below 4.0. The proposed model and correlation also have been validated with a considerable accuracy for predicting the performance of internally-cooled dehumidifiers. This work has experimentally demonstrated the ability of the multi-stage internally-cooled liquid desiccant dehumidifier to overcome the low effectiveness at high gas–liquid flow ratios, which advances the potential application of liquid desiccant dehumidification in the air compression process.

Experimental Study On A New Internally Cooled Dehumidifier Using Licl-H2o

Experimental Analysis of an Internally-Cooled Liquid Desiccant Dehumidifier

Performance Analysis on the Internally Cooled Dehumidifier Using Liquid Desiccant

RESEARCH ON THE HEAT AND MASS TRANSFER PERFORMANCE AND FLOW-PATI'ERN COMPARISON OF THE INTERNALLY-COOLED LIQUID DESICCANT DEHUMIDIFIERS

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

Experimental analysis of an internally-cooled/heated liquid desiccant dehumidifier/regenerator made of thermally conductive plastic

An Experimental Study on the Dehumidification Performance of a Counter Flow Liquid Desiccant Dehumidifier

A KIND OF INTERNAL SOURCE SOLID ADSORPTION DEHUMIDIFIER

Analytical Solution of Heat and Mass Transfer Process in Internally Cooled Liquid Desiccant Dehumidifiers Using Refrigerant As Cooling Medium

Experimental Study on Mass Transfer Performances of Cross Flow Dehumidifier Using Liquid Desiccant

Performance Comparison of Three Typical Types of Internally-Cooled Liquid Desiccant Dehumidifiers

A view on the performance comparison between adiabatic and internally-cooled dehumidification processes using liquid desiccant

Review of Internally Cooled Liquid Desiccant Air Dehumidification: Materials, Components, Systems, and Performances

Comparison of Internally Cooled and Adiabatic Liquid Desiccant Dehumidification-Regeneration System

Model-based Investigation of a Heat Pump Driven, Internally Cooled Liquid Desiccant Dehumidification System

Design And Study Of A Novel System For Solid Desiccant Dehumidification

Transient performance study of an internally-cooled plate membrane liquid desiccant air dehumidification system

A hybrid dehumidifier model for real-time performance monitoring, control and optimization in liquid desiccant dehumidification system

Experimental and Numerical Investigation of a Novel Hybrid Deep-Dehumidification System Using Liquid Desiccant

High-performance multi-stage internally-cooled liquid desiccant dehumidifier for high gas–liquid flow ratios

Study On The Performance Of Heat And Mass Transfer Of Cross Flow Dehumidifier In An Industrial Plant