Abstract:In this paper, we shall present a new micromechanical damage model for capturing the mechanical behaviors of quasi-brittle geomaterials under a wide range of compressive stress. Two essential coupled non-linear mechanisms are taken into account: plastic deformation related to frictional sliding along the microcrack surfaces, and microscopic damage induced by the initiation and propagation of microcracks. Within the framework of thermodynamics and Mori–Tanaka homogenization scheme, free energy and thermodynamic forces, including the local stress applied on the microcracks and damage driving force are deduced. The main novelty of this work lies in presenting a new physically based non-associated and state-dependent friction law to capture the plastic distortion, in which the friction coefficient is no longer a constant but a state-dependent variable varying with the surface asperities of microcracks. The relationship between the friction coefficient and mean local stress, as well as microscopic damage is subtly defined. Intriguingly, a macroscopic strength criterion is derived as an inherent part of the proposed model without rotation of the principal stress. Moreover, semi-analytical stress–strain–damage relationships of the proposed model can be derived under conventional triaxial compression. These up-scaling analyses provide a powerful tool for parameter calibration. For application, the semi-implicit return mapping algorithm with plasticity-damage decoupling correction procedure (SRM-PDDC) is adopted for numerical implementation. To demonstrate the performance of the micromechanical model, we compare the model predictions with experimental data of quasi-brittle rocks in literature as well as the results obtained by Zhu et al. (2016). Finally, the applicable condition of the SRM-PDDC algorithm is discussed in detail.

An Elastoplastic Damage Model for Geomaterials and Analysis of Strain Localizaion of Arch Dams

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

A Strength Degradation Model of Saturated Soft Clay and Its Application in Caisson Breakwater

ELASTO-PLASTIC DAMAGE MODEL FOR GEOMATERIALS AND STRAIN LOCALIZAION ANALYSES

Analysis of discontinuous bifurcations for elasto-plastic geomaterials with effect of damage

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A New Three-Dimensional Fem Model on Arch Dam Cracking Analysis

A Heuristic Elastoplastic Damage Constitutive Modeling Method for Geomaterials: From Strength Criterion to Analytical Full-Spectrum Stress–Strain Curves

Evaluation of Long-Term Stability for High Arch Dam Based on the Viscoplasticity Damage Model

Simulation of localization failure with strain-gradient-enhanced damage mechanics

Fracture Analysis of Brittle Materials Based on Nonlinear FEM and Application in Arch Dam with Fractures

Analysis of Damage and Cracking in Arch Dams Subjected to Extremely Strong Earthquake

A physically-based elastoplastic damage model for quasi-brittle geomaterials under freeze-thaw cycles and loading

Elasto-Plastic Dynamic Finite Element Analysis of an Earth-Rockfill Dam

A damage constitutive model for concrete under uniaxial compression capturing strain localization

A micro-mechanics-based elastoplastic friction-damage model for brittle rocks and its application in deformation analysis of the left bank slope of Jinping I hydropower station

Evaluation of Long-Term Stability for High Arch Dam and Its Application

An elastoplastic damage model for concrete considering the influence of mesostructure on transverse deformation

Stability Analysis For Arch Dams Using Damage-Bifurcation Method

Experimental Investigation and Micromechanical Modeling of Elastoplastic Damage Behavior of Sandstone

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law