Abstract:In this paper, we shall present a new micromechanical damage model for capturing the mechanical behaviors of quasi-brittle geomaterials under a wide range of compressive stress. Two essential coupled non-linear mechanisms are taken into account: plastic deformation related to frictional sliding along the microcrack surfaces, and microscopic damage induced by the initiation and propagation of microcracks. Within the framework of thermodynamics and Mori–Tanaka homogenization scheme, free energy and thermodynamic forces, including the local stress applied on the microcracks and damage driving force are deduced. The main novelty of this work lies in presenting a new physically based non-associated and state-dependent friction law to capture the plastic distortion, in which the friction coefficient is no longer a constant but a state-dependent variable varying with the surface asperities of microcracks. The relationship between the friction coefficient and mean local stress, as well as microscopic damage is subtly defined. Intriguingly, a macroscopic strength criterion is derived as an inherent part of the proposed model without rotation of the principal stress. Moreover, semi-analytical stress–strain–damage relationships of the proposed model can be derived under conventional triaxial compression. These up-scaling analyses provide a powerful tool for parameter calibration. For application, the semi-implicit return mapping algorithm with plasticity-damage decoupling correction procedure (SRM-PDDC) is adopted for numerical implementation. To demonstrate the performance of the micromechanical model, we compare the model predictions with experimental data of quasi-brittle rocks in literature as well as the results obtained by Zhu et al. (2016). Finally, the applicable condition of the SRM-PDDC algorithm is discussed in detail.

ELASTO-PLASTIC DAMAGE MODEL FOR GEOMATERIALS AND STRAIN LOCALIZAION ANALYSES

An Elastoplastic Damage Model for Geomaterials and Analysis of Strain Localizaion of Arch Dams

Influence of Damage on Properties of Strain Localization in Geomaterials at Plane Stress and Plane Strain

A Heuristic Elastoplastic Damage Constitutive Modeling Method for Geomaterials: From Strength Criterion to Analytical Full-Spectrum Stress–Strain Curves

Isotropic Elasto-Plastic Damage Mechanics

Coupled elasto-plastic microplane damage model for jointed rock masses at great depth

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Large-deformation Geomechanical Problems Studied by a Shear-Transformation-zone Model Using the Material Point Method

An elastoplastic damage model for concrete considering the influence of mesostructure on transverse deformation

Shear Banding Analysis of Geomaterials by Strain Gradient Enhanced Damage Model

A physically-based elastoplastic damage model for quasi-brittle geomaterials under freeze-thaw cycles and loading

A Micro‐mechanical Damage Model Based on Gradient Plasticity: Algorithms and Applications

Micromechanical Modeling Of Tensile Response Of Elastic-Brittle Materials

A 3D objective material model for elastic-plastic damage behavior of fiber reinforced polymer composites

A hyperelastic-damage model based on the strain invariants

A Thermodynamical Consistent Microplane Plastic-Damage Model For Concrete

Simulation of localization failure with strain-gradient-enhanced damage mechanics

A Microplane-Based Anisotropic Damage Model for Deformation and Fracturing of Brittle Rocks

Plastic damage fracture characteristics and constitutive modeling of rocks under uniaxial compression considering crack geometry