Abstract:In order to study the hydroforming simulation process of variable cross-section shaped tubular automobile longitudinal arm and the influence law of key factors on its forming quality, and to provide guidance for its engineering application. Firstly, the numerical simulation and experimental analysis of hydroforming are carried out on variable diameter tube with similar characteristics to the longitudinal arm hydroforming, and the correctness of the built finite element model and numerical simulation method is verified through experiments. Then, according to the structural characteristics of the automobile longitudinal arm parts, determine the longitudinal arm hydroforming process and the main molding parameters, and analyze the molding process by numerical simulation. According to the simulation results, the effects of hydroforming initial internal pressure, initial feeding, friction coefficient and shaping pressure on the wall thickness characteristics and shaping rules of the longitudinal arm are investigated, and the hydraulic expansion test of automobile longitudinal arm is carried out on the basis of the optimal loading path obtained. The results show that: in the case that the initial internal pressure does not reach the cracking pressure, the initial internal pressure and initial axial feeding has a greater impact on the wall thickness of the automobile longitudinal arm, reduce the friction coefficient can improve the material flow performance, improve the uniformity of the wall thickness of the parts, and appropriately increase the shaping pressure can improve the dimensional accuracy of the longitudinal arm molding and the molding quality. It is verified by experimental comparison that the whole process of automobile longitudinal arm forming simulation based on bending-hydraulic forming has high feasibility, and a relatively good loading path can be obtained to provide reference for practical engineering applications.

The Effects of Material Property Parameters on the Thickness Distribution of Hydroformed Parts

Analysis of thickness distribution of square-sectional hydroformed parts

Effect of Internal Pressure Distribution on Thickness Uniformity of Hydroforming Y-shaped Tube

Effects of loading paths on thickness distribution of a hydroforming component

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

Investigation on the Factors Influencing the Thickness Distribution of Superplastic-Formed Components

Effect of the process parameters on T-shaped tube hydroforming

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Research on the hydroforming law of variable cross-section shaped tubular automobile longitudinal arm

An Approach to Improve Thickness Uniformity Within Tailor-Welded Tube Hydroforming

Hydroforming of Automotive Structural Components with Rectangular-Sections

A Study on Numerical Simulation of Hydroforming of Aluminum Alloy Tube

Influence of process parameters on the flow forming quality of thin-walled tube with large diameter-thickness ratio

Study on the Factors Affecting the Corner Filling Process in Hydroforming

Thickness Dividing Circle in Hydroforming of Variable Diameter Tubes

Effects of Mechanical Property Parameters on Wrinkling Behavior of Thin-Walled Tubes in Hydroforming Process

Thickness Distribution in the Guiding Zone of Hydroforming of Tube with Variable Cross Sections

Effects of Thickness Ratio and Length Ratio on Deformation Uniformity of Tailor-Welded Tube Hydroforming

Experimental and Numerical Investigation on Axial Hydro-Forging Sequence of 6063 Aluminum Alloy Tube