Abstract:This study concentrates on the dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Then the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, then were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens under different cooling methods were conducted. The change in mechanical properties of high‐temperature rock after cooling treatments is getting increasing attention. However, only a few studies have been conducted on the dynamic characteristic parameters. Therefore, this study aims to perform a dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Accordingly, the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, and they were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens were conducted using different cooling methods. Subsequently, the change rules of dynamic stress–strain curves and properties were calculated, and the morphology and micromorphology of fragments were compared. Based on the outcomes, the thermal shock damage and impact damage evolution were evaluated and quantified. The findings revealed that when the treatment temperature increases, the dynamic peak stress and elastic modulus decrease, while the peak strain increases, and the effect of rapid cooling was more significant in the influence of rock dynamic characteristics. Moreover, when the damage factor is more than 0.51, the change of dynamic stress‐strain is accelerated, leading to the instability of the structure under the impact load. The research results are expected to provide an adequate theoretical basis for the development and utilization of geothermal resources and underground engineering applications.

A preliminary investigation of rocks subjected to thermal shock

Experimental Study on Mechanical Behaviors and Fracture Features of Coarse Marble Specimens after Thermal Shock

Investigation of the Dynamic Damage of the Rocks Subjected to Short Pulse Laser

Experimental study on the evolution patterns of bursting liability of hard and brittle sandstone under microwave thermal shock

Preparing rock samples using high temperature heating damage method and its application

Thermal damage of high-temperature sandstone subjected to cooling shock and its effect on capturing acoustic emission signals during fracture

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Thermal Shock Effects on the Mechanical Behavior of Granite Exposed to Dynamic Loading

Damage of Sandstone Induced by Repetitive Impact Loading

Preliminary investigation on the interaction mechanism of rocks and short pulse laser

Effect of thermal shock on laboratory hydraulic fracturing in Laizhou granite: An experimental study

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Study on Impact Tendency and Damage Characteristics of Rock-Like Materials Based on Acoustic and Thermal Responses

Experimental study on the variation of physical and mechanical of rock after high temperature treatment

Numerical simulation and experimental investigation of the propagation law of plasma pulse shock waves

Investigation of heat transfer and damage characteristics of high pressure abrasive water jet impacting high temperature sandstone

INVESTIGATION ON IMPACT RESPONSES FOR ROCK-LIKE BRITTLE MATERIALS

Thermal Infrared Precursor Information of Rock Surface during Failure Considering Different Intermediate Principal Stresses

Thermal Shock Effect on Acoustic Emission Response During Laboratory Hydraulic Fracturing in Laizhou Granite