Heat Circuit Method for Calculating Temperature Rise of Scott Traction Transformer

Li-jun ZHOU,Guang-ning WU,Hao TANG,Chong SU,Hong-liang WANG

DOI: https://doi.org/10.3969/j.issn.1003-6520.2007.03.032

2007-01-01

Abstract:The insulation life of a traction transformer is determined partially by hot-spot temperature and depends on the ability of the transformer to dissipate the internally generated heat to its surroundings.Scott connected traction transformers are three-phase to two-phase balancing transformers,and it is of significance to study on the inner temperature rise in this kind of traction transformer,especially the hot-spot temperature rise and the corresponding calculation method,which is quite different from power transformers due to the different winding connection and the different loads,the traction loads are impacted loadings.According to the especial winding connection,the core structure and the electric characteristic,producing and transfer of the heat in Scott connected traction transformer are analyzed by simply using momentum,heat,and mass transfer principle.And referring to electric circuit principle,the heat circuit of Scott connected traction transformer is then proposed.On the basis of analyzing the current and resistance of the windings,the relations of the load losses of the windings and the load losses of the Scott connected traction transformer under rated loads are obtained.According to the basic role of heat circuit,the calculating model based on heat circuit for calculating inner temperature rise of Scott connected traction transformer is deduced,which is simplified to obtain the simplified heat circuit.Heat circle method is validated by comparing the simulating results under the impacted loads using the heat circle method and IEC method.