Thyristor Photoelectric Firing and Monitoring System Applied to TCR

LIU Fei,LU Zhi-liang,LIU Yan,XU Zheng

DOI: https://doi.org/10.3969/j.issn.1003-6520.2007.06.030

2007-01-01

Abstract:With the development of power electronic technology, more and more static var compensators(SVC) have been installed.In order to fully meet the triggering and on-line monitoring requirements of thyristor valves used for the thyristor controlled reactor(TCR) in SVC,this paper proposes a photoelectric firing and on-line monitoring system.Comparing with electromagnetic firing system,the photoelectric one presents more attractive features such as easily monitoring operation status of the high voltage thyristor valves on-line,possessing good electromagnetic compatibility,and producing unanimous steep triggering signal,which are very important to serial connected thyristors operation.The designed system mainly comprises of the thyristor electronic board(TE),fiber transmission and the valve base electronic board(VBE).The TE board located in high potential obtains energy from the snubber circuit,decode control signal and send back thyristor status signal.The VBE installed in low potential is the interface between the control system and TE,and delivers or receives signal among them.The optic fiber transmission system provides communication between TE and VBE.The main function and operation process of the VBE and TE board are analyzed in detail.The three-pulse communication protocol,self-powered circuit,logic decoding circuit,BOD protection circuit and thyristor triggering circuit are stressed in discussion.And a whole set of VBE and TE board is developed and tested by simulation and experiment,and the firing,three-pulse encoding and decoding experimental results are also presented.The experimental results indicate that the designed system satisfies the needs of high-voltage thyristor valve successfully.