Abstract:In this work, tannic acid (TA)-functionalized carbon nanotubes () were synthesized by hydrogen bond and π–π stacking interactions. embedded with silver nanoparticles () was obtained by in situ reducing silver ammonia ions in the pore channels of and were added into the polyamide (PA) layer by interfacial polymerization to fabricate high-performance nanocomposite reverse osmosis membranes. The results show that the functionalized CNTs can be uniformly distributed in the PA matrix with random orientations. A loose PA separation layer was obtained by introducing Correspondingly, abundant new water channels were formed. Compared with the pure PA membrane, the water permeability (4.81 L m–2 h–1 bar–1) of the nanocomposite membrane is enhanced by 49.8% without any loss in NaCl rejection (99.3%). The membrane exhibits satisfactory chemical- and bio-fouling resistances to bovine serum albumin and Escherichia coli as model foulants. The high bactericidal rate should be ascribed to the formation of the TA coating and confined Ag nanoparticles in CNT channels. The confined structure effectively avoids the leaching out of the Ag nanoparticles and keeps the persistence of the antibacterial property. The excellent compatibility between the CNTs and the polyamide matrix endows the membrane with long-term performance stability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c03313.Experimental procedure of the antibacterial property of the membranes; optical photographs of the uncoated CNT, , and samples dispersed in deionized water; EDX spectrum of the sample; three-dimensional AFM and SEM images of the fabricated various membranes; permeate fluxes and salt rejections of the PA/ membranes with different amounts of the incorporated in 2% MPD solution; formed bacterial colonies by 24 h growth on the agar culture medium after E. coli suspension contacting with the fabricated various membranes; arithmetic average value (Ra) and root-mean-square value (Rq) of the membrane surface roughness from AFM measurements; flux decline rate (Fdr), flux recovery rate (Frr), and irreversible decline rate (Firr) in each fouling cycle for the fabricated PA-based membranes using 100 mg/L BSA as a foulant solution; resistance values from the concentration polarization (rcp) and the reversible (rrf) and irreversible (rif) fouling resistance values of the fabricated PA-based membranes, respectively, using 100 mg/L BSA and 10 mg/L HA as foulant solutions (PDF)This article has not yet been cited by other publications.

Characterization and Antibacterial Effect of a Novel Nanocomposite Membrane

Membrane surfaces immobilized with ionic or reduced silver and their anti-biofouling performances

In-situ synthesis and immobilization of silver nanoparticles on microfibrillated cellulose for long-term antibacterial applications

Synthesis, Structural Characteristics and Properties of Silver Nanoparticles in Situ Bacterial Cellulose Gelatinous Membrane

Antimicrobial, and Antibiofilm Activities of Silver Doped Hydroxyapatite: A Novel Bioceramic Material for Dental Filling

Mitigation of Biofilm Development on Thin-Film Composite Membranes Functionalized with Zwitterionic Polymers and Silver Nanoparticles.

Preparation of a novel positively charged nanofiltration composite membrane incorporated with silver nanoparticles for pharmaceuticals and personal care product rejection and antibacterial properties.

Characterization and Antibiofouling Performance Investigation of Hydrophobic Silver Nanocomposite Membranes: A Comparative Study

Electrospun PVA Nanofibrous Membranes Reinforced with Silver Nanoparticles Impregnated Cellulosic Fibers: Morphology and Antibacterial Property

Enhanced antibacterial activity of anodic aluminum oxide membranes embedded with nano-silver-titanium dioxide

Multiaction Antibacterial Nanofibrous Membranes Fabricated by Electrospinning: an Excellent System for Antibacterial Applications.

Enhanced hydrophilicity and antibacterial efficacy of in-situ silver nanoparticles decorated Ti3C2Tx/Polylactic acid composite membrane for real hospital wastewater purification

A Nanocomposite Hydrogel with Potent and Broad-Spectrum Antibacterial Activity

Silver-Zwitterion Organic-Inorganic Nanocomposite With Antimicrobial And Antiadhesive Capabilities

Long-term, synergistic and high-efficient antibacterial polyacrylonitrile nanofibrous membrane prepared by “one-pot” electrospinning process

Antimicrobial activity of thin-film composite membranes functionalized with cellulose nanocrystals and silver nanoparticles via one-pot deposition and layer-by-layer assembly

Functional Bacterial Cellulose Nanofibrils with Silver Nanoparticles and Its Antibacterial Application.

Incorporation of Silver-Embedded Carbon Nanotubes Coated with Tannic Acid into Polyamide Reverse Osmosis Membranes toward High Permeability, Antifouling, and Antibacterial Properties

Synthesis of Silver-Incorporated Hydroxyapatite Nanocomposites for Antimicrobial Implant Coatings

Hyperbranched polymer nanofibrous membrane grafted with silver nanoparticles for dual antifouling and antibacterial properties against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa

Fabrication of Curcumin@Ag Loaded Core/Shell Nanofiber Membrane and its Synergistic Antibacterial Properties