Effect of Ultrasonic Treatment and Squeeze Casting on the Microstructural Refinement of Al–Cu–Mn Alloys
Yuliang Zhao,Weixiang He,Yang,Huan Liu,Qiuyun Wei,Bo Lin,Dongfu Song,Zhenzhong Sun,Weiwen Zhang
DOI: https://doi.org/10.1007/s40962-023-01092-9
2023-01-01
International Journal of Metalcasting
Abstract:Aluminum–copper-based alloy has a broad liquidus to solidus temperature range, making it susceptible to the formation defects such as pores and shrinkage pores during the process of solidification. Hence, ultrasonic vibration and squeeze casting can help to refine the microstructure and eliminate the formation of pores. In this paper, we used an optical microscope, scanning electron microscope, transmission electron microscope, differential scanning calorimetry, and thermal analysis to study the ultrasonic treatment (UT) and squeeze casting (SC) on the as-cast and heat-treated microstructure of Al–Cu–Mn alloys. The results show that a significant refinement can be obtained by the compound field compared with that of the individual field. The applied UT time is 30 s and 120 s, respectively. The smallest grain size and the finest Al2Cu particles are observed in the alloy with a treated time of 120 s. This is due to the ultrasonic field breaking the dendrites and promoting the flow of molten Al; squeeze casting increases the cooling rate and stimulates the nucleation temperature of α-Al. The size of the θ′ phase after compound field treatment is smaller because more Cu atoms are dissolved in the Al matrix, so the θ' strengthening phase is finely dispersed in the Al alloy matrix. It is concluded that the compound field of UT and SC is a potentially advantageous process to refine the microstructure of Al alloys.