Abstract:The behavior of granular materials is very complex in nature and depends on particle shape, stress path, fabric, density, particle size distribution, amongst others. This paper presents a study of the effect of particle geometry (aspect ratio) on the mechanical behaviour of granular materials using the discrete element method (DEM). This study discusses 3D DEM simulations of conventional triaxial and true triaxial tests. The numerical experiments employ samples with different particle aspect ratios and a unique particle size distribution (PSD). Test results show that both particle aspect ratio (AR) and intermediate stress ratio (b=(σ2′-σ3′)/(σ1′-σ3′))\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$(b=({\upsigma }_{2}'-{\upsigma }_{3}')/({\upsigma }_{1}'-{\upsigma }_{3}'))$$\end{document} affect the macro- and micro-scale responses. At the macro-scale, the shear strength decreases with an increase in both aspect ratio and intermediate stress ratio b values. At the micro-scale level, the fabric evolution is also affected by both AR and b. The results from DEM analyses qualitatively agree with available experimental data. The critical state behaviour and failure states are also discussed. It is observed that the position of the critical state loci in the compression (e-p′)\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$(e-p')$$\end{document} space is only slightly affected by aspect ratio (AR) while the critical stress ratio is dependent on both AR and b. It is also demonstrated that the influence of the aspect ratio and the intermediate stress can be captured by micro-scale fabric evolutions that can be well understood within the framework of existing critical state theories. It is also found that for a given stress path, a unique critical state fabric norm is dependent on the particle shape but is independent of critical state void ratio.

Effect of the stress triaxiality on the ductile fracture

Dependence of ductile fracture on stress triaxiality factor

Numerical study on mechanical properties of grains in rock discontinuity undergoing shear

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

Size effects on the ductile/brittle fracture properties of the pressure vessel steel 20 g

Experimental Investigation of the Size Effects on the Fracture Toughness and Tearing Modulus

A ductile fracture criterion based on stress triaxiality and its application to the shearing process

Coupled effect of stress state and strain rate on ductile fracture of Ti6Al4V alloy

Effect Of Confining Pressure On Stress Intensity Factors For Cracked Brazilian Disk

Critical ductile fracture criterion based on first principal stress and stress triaxiality

Thickness effect on the ductile fracture properties of the vessel steel with small punch testing techniques

Stress-state dependency of ductile fracture in an extruded magnesium alloy and its underlying mechanisms

An uncoupled ductile fracture model considering void shape change and necking coalescence

EFFECT OF OUT-OF-PLANE CONSTRAINT ON DUCTILE FRACTURE TOUGHNESS

Investigation of an updated continuum damage model in the DBTT region

Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy

Fracture energy and tensile strength depending on stress triaxiality along a running crack front in three-dimensional cohesive modeling

Discrete Element Simulation of Macro and Micro Mechanical Properties of Round Gravel Material under Triaxial Stress

Fracture prediction of high-strength steel sheet during in-plane compression-shear forming under negative stress triaxiality

A ductile damage criterion at various stress triaxialities

The influence of particle geometry and the intermediate stress ratio on the shear behavior of granular materials