Abstract:In this paper, three-dimensional multiblade row Navier-Stokes simulations have been performed to investigate the effects of tip clearance size on the flow characteristics of a vaneless counter-rotating turbine. The tip clearance sizes studied in this paper are 0.0mm (without rotor tip clearance), 0.5mm (0.65% high-pressure turbine rotor height, 0.52% low-pressure turbine rotor height), 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.0mm, individually. The numerical results indicate that the air mass flow rate of the vaneless counter-rotating turbine and the ratio of specific work of the high-pressure turbine to that of the low-pressure turbine increase when the rotor tip clearance size is increased. While the isentropic efficiency, the expansion ratio and the power of the vaneless counter-rotating turbine decrease as the tip clearance size is increased. The results also show that the existence of the tip clearance trends to decrease the Mach number at the high-pressure turbine outlet, and increase the Mach number at the low-pressure rotor outlet, especially at near the blade tip region, the extents of the decrease and increase of the Mach number are more remarkable. When the tip clearance size is increased, the Mach number decreases at the outlet of the high-pressure turbine, while increases at the outlet of the low-pressure rotor. The numerical results also illustrate that the existence of the tip clearance trends to decrease the flow angle at the high-pressure turbine outlet, especially at near the blade tip region, the extent of the decrease of the flow angle is more prominent. And the flow angle decreases with the increase of the tip clearance size at the high-pressure turbine outlet. Compared with the results at the high-pressure turbine outlet, the effects of the tip clearance on the flow angle are more complicated at the low-pressure rotor outlet. Along the low-pressure rotor span, the outlet flow angle shows several different evolution laws with the increase of the tip clearance size.

Numerical Simulation for Effects of Reynolds Numbers on Tip Leakage Flows in Turbine

Numerical Simulation of the Aerodynamic Characteristics of Blade Tip Leakage Flow in Steam Turbines

Effects of Low Reynolds Number on Turbine Blade Tip Leakage Flow

Numerical Simulation of tip clearance flow inside turbine rotors

Numerical Investigation on Effects of Leakage Flow on the Aerodynamic Performance of Turbine Stages

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Numerical Simulation Against Unsteady Flow from Cavity Leakage of Turbomachinery Stage

Analysis of the relationship between turbulence characteristics and loss mechanism in the tip leakage flow of turbine blade

Numerical Simulation for the Tip Leakage Vortex Cavitation

Turbulence Characteristic and Loss of Transonic Turbine Tip Leakage Vortex With Endwall Motion Effect

RANS Simulations of Tip Leakage Vortex Cavitation Flows around NACA0009 Hydrofoil

Numerical investigations on tip leakage flow characteristics and vortex trajectory prediction model in centrifugal compressor

Study on Unsteady Aerodynamic Performance of Turbine Stage Considering Tip Leakage Flow

Effect Of Relative Movement Between The Shroud And Blade On Tip Leakage Flow Characteristics

Influence of Tip Clearance Size on Flow Characteristics of a Vaneless Counter-Rotating Turbine

Numerical Investigations on Unsteady Leakage Flow and Heat Transfer Characteristics of Turbine Blade with Squealer Tip

Influences of a Multi-Cavity Tip on the Blade Tip and the over Tip Casing Aerothermal Performance in a High Pressure Turbine Cascade

Effects of Tip Injection in Different Locations on Clearance Leakage Flow of Turbine

Numerical Study Of Internal Flow Fields In Steam Turbine Stages With Balance Holes

Numerical Investigations on the Flow and Heat Transfer Characteristics of the Transonic Turbine Blade Tip

Numerical Simulation Of Cavitating Flow In A Francis Turbine