Numerical Simulation and Experimental Validation of Tip Leakage Vortex Breakdown under Large Clearance
Kun Qian,Litao Li,Yanhui Wu,Yapeng Xue
DOI: https://doi.org/10.33737/gpps23-tc-191
2023-01-01
Proceedings
Abstract:The present study aims to enhance the comprehension of the flow field near the casing of an isolated rotor in a small-scale high-speed axial flow compressor. To achieve this objective, steady three-dimensional viscous flow calculations are employed to obtain flow fields under different operational conditions. To validate the accuracy of the computations, a comparison is made between the numerical results and existing measured data, revealing a favorable agreement. Then, using experiment measurements and numerical simulation, the casing pressure signals and steady flowfields at different operation points are analyzed in detail. The frequency spectrum shows that a high-amplitude region, which covering the passage of tip clearance and a bandwidth around 0.5BPF, occurs at peak efficiency condition. In addition, as the mass flow rate is further decreased, the high-amplitude region becomes more intense and the area moves upstream. Numerical simulation results explains the flow phenomena observed in experiments. In core area of the tip leakage vortex, the swirl parameter turns from negative to positive at the peak efficiency point, indicating that the leakage vortex breakdown. During the process of gradually approaching the steady calculate boundary point, the vortex breakdown results in the low-energy fluid accumulating on the casing wall, which causes a sudden growth of the casing wall boundary layer having a large blockage effect. A low-velocity region develops along the tip clearance vortex due to the vortex “breakdown”. Compared with the vortex external, the different colors of helix angle in vortex core shows opposite rotation direction.