Abstract:Based on the theory of ecological resources recycling, the effects of matrix quality, surface treatment method, soaking time, age after treatment and fluosilicate cation on hardening cement based materials were investigated by using the byproduct of phosphate fertilizer production namely fluosilicate as the surface treatment agent of cement-based materials and changing different surface treatments. The results showed that the permeation capacity of surface hardener solution , the wear resistance and surface hardness of cement-based materials were significantly improved by the treatments of surface sanding and oven drying. Both surface spraying and submerging methods can promptly increase the hardening effect by more than 20%, manifesting as the rapid improvement of wear resistance in 1 day and the maintenance of that in 7 days. The effective spraying amount and soaking time were 100g/m2-200g/m2 and 6 h, respectively. The fluosilicate surface hardener exhibited better hardening effect than the silicate surface hardener for those matrix materials with different quality, especially for the matrix materials with low compactness. The magnesium fluosilicate displayed the best hardening effect. Besides, the mechanism of fluosilicate and silicate surface hardeners were discussed and compared. The results show that the fluosilicate surface hardener produced crystals and colloids by reacting with cement hydrates to fill the void and improve the compactness, other than the silicate surface hardener which produced calcium silicates by reacting with cement hydrates. As a result, the hardness and wear resistance of cement-based materials are improved, but also the probability of a potential alkali-aggregate reaction is substantially reduced.

Performances Change and Answer Strategies of the Sodium Silicate Reclaimed Sand Hardened with Ester after Recurrence Using

Present Situation and Development Trend of Sodium Silicate Binder Modification Technique

Preliminary assessment of the efficacy of nano-MgO-based dispersion for the consolidation of artificial weathered sandstone

Study on Performance Characteristics of Sodium Silicate Sand Hardened by Superfines

Performance of Silane -Based Surface Treatments for Protecting Degraded Historic Concrete

Advantages of New Type Ester-Hardened Sodium Silicate Sand and Factors Influencing Its Properties

Improvement of the natural temperature strength and collapsibility of sodium silicate sand hardened by ester

Study of Thermal and Wet Reclamation Technology of Used Sodium Silicate Bonded Sand

Performance Character of Used Sodium Silicate Sand Under Different Temperature

In House Reuse and Reclamation of Used Foundry Sands with Sodium Silicate Binder

Effect of Sands on Properties of Ester-Hardened Silicate Bonded Sand

Mechanical properties and reclaimable capacity of used sodium silicate sand

Dry Reclamation of Sodium Silicate-bonded Sands

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Dry Reusing and Wet Reclaiming of Used Sodium Silicate Sand

Effect of Typical Modification Methods and Materials on Sodium Silicate Binder and Mechanism

Hardening Performance and Mechanism of Fluosilicate Surface Treatment Agent on Cement-Based Materials

Study on Dry Reclaimability of Used Sodium Silicate Sand at Abnormal Temperature

Water Content of Sodium Silicate Sand Effect on Dry Sand Reclamation

Performance Comparison and Mechanism Analysis of Several No-Bake Sand

The Study on Sodium Silicate Bonded Sand-Expendable Pattern Casting(EPC) Process