Abstract:Sandstone is a common sedimentary rock that is easily carved due to its weakly cemented fine grains and relatively low strength. Therefore, numerous large-scale grottoes in China are made of sandstone. However, these sandstone cultural heritage structures are often seriously damaged due to temperature and humidity changes, air pollution, biodeterioration, and repeated dissolution and crystallization of soluble salts. In general, it is imperative that a consolidant capable of providing cohesion by infilling pores between the stone grains is synthesized. In recent years, it has been reported that using organic consolidation materials for sandstone protection comes with various negative effects, such as a short lifetime, poor compatibility, and preservation damage. Using inorganic consolidation materials to protect sandstone seems to be one of the research trends for the future. Herein, this paper introduces a permeable, inorganic magnesium-based material (MMH solution) for silica sand consolidation. To assess this consolidant, the paper investigates the influence of varying molar ratios of MgO:MgCl2 center dot 6H(2)O:H2O on properties such as penetration depth, consolidation weight, colour variation, and compressive strength. The results demonstrate that the molar ratios of MgO:MgCl2 center dot 6H(2)O:H2O can significantly affect the consolidation performance. Additionally, it is believed that the MMH solution of MgO:MgCl2 center dot 6H(2)O:H2O = 5:1:16 can be successfully used for the consolidation of silica sand, as the cubic specimens' surface micrographs show good compatibility between the consolidation product and sand grains. Experiments (i.e. weight loss rate and mineralogical compositions analysis) are performed to evaluate the cubic specimens' water resistance properties after being immersed in water. Furthermore, the consolidation material's failure mechanism as a self-sacrificing material is preliminarily analyzed. Results indicate that MMH solution is a promising conservation material that shows great potential for consolidating severely weathered sandstone.

Dry Reclamation of Sodium Silicate-bonded Sands

Preliminary assessment of the efficacy of nano-MgO-based dispersion for the consolidation of artificial weathered sandstone

Study On Consolidation Behaviors Of Waste Slurry By Using Vacuum Filtration Test

Synthesis of sodium silicate using industrial by-products glauber’s salt and microsilica: Effective reuse of the waste

Regeneration of used sand with sodium silicate binder by wet method and their core manufacturing

A Novel Method for Purification of Low Grade Diatomite Powders in Centrifugal Fields

Effect of Sand on the Vacuum Consolidation of Dredged Slurry

Effect of electrolysis desaturation treatment on micro-structure of liquefiable silica sands

Selective extraction of sodium from red mud by dry digestion

Extraction of sodium metasilicate from fly ash to Al2O3 production wastewater

Recycling of silicon from waste PV diamond wire sawing silicon powders: A strategy of Na2CO3-assisted pressure-less sintering and acid leaching

Recovery of Chlorosilane Residual Liquid to Prepare Nano-Silica via the Reverse Micro-Emulsion Process

Electrochemical chlorine evolution reaction to improve the desalination of sea sand

ProSeal LMA — how long is too long?

An Inorganic Magnesium-based Consolidant for the Consolidation of Silica Sand (A Substitute for Weathered Sandstone): A Preliminary Exploration

Chemical sand stabilization: A review of material, mechanism, and problems

Efficient Recovery of Silicon from Silicon Slag by Interface Modification Combined with Flotation

Dilatancy behaviors of calcareous sand considering particle breakage

Feasibility of using three solid wastes/byproducts to produce pumpable materials for land reclamation

Wetting characteristic and flow behavior of silicate binder at various sand particle-particle interfaces: Fine or coarse, circular or angular particles

Biomineralization for Reducing and Controlling Sand‐Dust Storms