Abstract:Induction motors with ring windings (IMRW) are designed for the processing of nuclear waste. The sta-tor winding coils are covered with ceramic insulation to allow for long-term operation in conditions of increased radiation. The stator coils are ring shaped, in order to reduce the bend angle. The stator has a specific design consisting of tooth tips located around the axis of rotation and tooth cores placed over the tooth tips in a spiral. The first IMRW prototype was manufactured by UrFU together with “Uralelectromash”. It was designed to the same diameters as an induction motor of a classical design with a power P = 2.2 kW, with a synchronous rotation speed n = 1000 rpm. The fundamentally new ar-mature design involves the search for new solutions for determining machine parameters, such as inductances, electro-magnetic torques. The article discusses a method of equivalent circuit parameter calculation for IMRW using the “ANSYS Maxwell” in 3D mode. In order to determine stator winding leakage inductances, a static analysis of the model with the ro-tor removed was used. Mutual inductance is defined as the difference between stator winding phase impedance and leak-age inductance. The active resistance of the magnetizing circuit and the impedance of the motor can be determined using the IMRW no-load and short-circuit characteristics obtained in ANSYS Maxwell. The paper also provides an example of calculating the mechanical characteristics of a motor using the analytical method (AM).This involves the use of equivalent circuit parameters, and the finite element method (FEM). The use of FEM for calculating the mechanical characteristics implies the analysis of IMRW in a dynamic mode. This allows the electromagnetic torque to be determined at a user-specified rotor speed. In conclusion, a comparative analysis of the parameters of a classic engine and IMRW engine, of the same size, is given. Recommendations are given for further improvement of the design of IMRW engines.

Material Characteristic Analysis and Different Load Performances Calculation of IMCCR

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Analysis and simulation of HTS squirrel cage induction motor

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Optimization Design of Linear Induction Motor and Study of the 3-Phase Asymmetry Phenomenon

Analysis and Comparison of Inductance and Suspension Force for 2-4 Type and 4-2 Type Multiphase Permanent Magnet Bearingless Motors

Rotor Eddy Current Analysis and Optimisation Design of Intermediate Ring in Novel Double Squirrel‐cage Induction Motor

Analysis and Experiment of a 6-Phase Bearingless Induction Motor

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Magnetic Field Analysis of Surface-Mounted Permanent Magnet Motors Based on an Improved Conformal Mapping Method

A Simple Method to Determine Double-Cage Rotor Equivalent Circuit Parameters of Induction Motors From No-Load and Locked-Rotor Tests

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

Calculation and Measurement of Parameters of A Multiphase Induction Motor

Calculation of cogging torque in squirrel-cage induction motors

THE EQUIVALENT CIRCUIT PARAMETERS CALCULATION OF INDUCTION MOTORS WITH RING WINDINGS

Characteristics Study of Single Phase Deep-slot Linear Induction Motor Based on Field-circuit Combined Model

Analytical Calculation of Performance of Line-Start Permanent-Magnet Synchronous Motors Based on Multidamping-Circuit Model

Stray Load Loss Calculation for Induction Motor by Combination of General Airgap Field Modulation Theory and 2D FEA