Abstract:The heavy self-weight and the cracking of normal strength concrete (NSC) deck slabs hindered the application of steel-concrete composite girders in long-span bridges. These problems can be solved by using ultra-high per-formance concrete (UHPC) deck slabs instead of the NSC deck slabs. Based on Yellow River Bridge of Zhanhua-Linzi Highway, a steel-UHPC composite cable-stayed bridge with span length of 442 m, full-scale tests on seven continuous UHPC (NSC) deck slabs were conducted. The studied parameters were sagging-to-hogging rein-forcement ratio, concrete type, yield strength of steel bars and wet joints. The static properties of continuous UHPC (NSC) deck slabs were investigated in detail, including failure modes, load-deflection response, cracking behavior, strain development and moment redistribution. Discussions were made on the effect of different pa-rameters according to the experimental data. Results showed that the use of UHPC can avoid shear failure, which was the case for the continuous NSC slab. Reducing the sagging-to-hogging reinforcement ratio from 1.00 to 0.63, the failure mode changed due to the altered formation order of plastic hinges. The ultimate capacity was decreased while the ductility and moment redistribution were improved by decreasing the yield strength of steel bars. The existence of wet joints significantly weakened the deck slabs. Strengthening the wet joints with steel plates can effectively compensate for this effect and even achieve better mechanical properties compared with integrally cast slabs. Furthermore, placing a comb-shaped wet joint at the intermediate support of continuous slab will result in a certain decrease of ultimate capacity and stiffness, which is acceptable for the transverse direction with relatively small internal forces. It is suggested that wet joints should be avoided at the supports of continuous deck slabs along the longitudinal direction.

Study on effective width of concrete deck in composite cable-stayed bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Composite Girder Design of Cable-Stayed Bridges

Mechanical behavior improving study of concrete deck of main beam at pylon root of composite beam cable-stayed bridge

Simplified Analysis Method Accounting for Shear-Lag Effect of Steel–concrete Composite Decks

Experimental study on the mechanical behavior and design method of plain steel-plate and concrete composite bridge decks

Experimental and Numerical Investigation on In-Plane Compression and Shear Performance of a Pultruded GFRP Composite Bridge Deck

Strengthening of steel decks for cable-stayed bridge using ultra-high performance concrete: A case study

Numerical Study on Static Aerodynamic Coefficients Aerodynamic Interference Effects of the Box girder Section of Continuous Rigid Frame Bridge with Close Twin Deck

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Experimental and theoretical analysis on flexural behavior of composite sandwich steel bridge deck

Mechanical Performance and Design Optimization of Rib-Stiffened Super-Wide Bridge Deck with Twin Box Girders in Concrete

Application of composite structures in bridge widening

Bridge Widening with Composite Steel-Concrete Girders: Application and Analysis of Live Load Distribution

Structural Performance and Strength Prediction of Steel-To-Concrete Box Girder Deck Transition Zone of Hybrid Steel-Concrete Cable-Stayed Bridges

Shear lag effect of twin I-shaped composite girders in cable-stayed bridges

Full-scale Experimental Study on Continuous UHPC Slabs of Steel-Uhpc Composite Deck System

Hot spot stress distribution and fatigue life evaluation of steel-UHPC deck in a long-span cable-stayed bridge

Fatigue performance evaluation of steel-UHPC composite orthotropic deck in a long-span cable-stayed bridge under in-service traffic

Shear connector performance analysis for composite bridge deck with corrugated steel sheeting

An Experimental Study on Negative Bending Behavior of Composite Bridge Decks with Steel-Fiber-Reinforced Concrete and Longitudinal Bulb-Flat Ribs