Abstract:Concrete structures in service are often subjected to environmental/operational temperature effects, which change their inherent properties and also inflict a challenge to their extrinsic monitoring systems. Recently, piezoelectric lead zirconate titanate (PZT)-based electromechanical admittance technique has been increasingly growing into an effective tool for concrete structural health monitoring; however, uncertainty in the changes of monitoring signals induced by temperature impact on concrete/PZT sensor would inevitably cause interference to structural damage detection, which adversely hinder its application from laboratory to engineering practice. This article, aiming at exploring the temperature effect on the electromechanical admittance–based concrete damage evaluation, primarily covered a series of theoretical/numerical analysis with rigorously experimental verifications. Three aspects of comparative studies were performed in theoretical/numerical analysis: (1) thermal-dependent parameters were inclusively evaluated in contribution to the electromechanical admittance characteristics via PZT-structure interaction models; (2) three-dimensional finite element analysis in multi-physics coupled field was employed to qualitatively assess the singular temperature effect on the electromechanical admittance behaviors of free-vibrated PZT, surface-bonded PZT/inside-embedded PZT coupled healthy concrete cubes; and (3) depending on the modeling of surface-bonded PZT-/inside-embedded PZT-cracked concrete cube, thermal effect on damage evaluation was addressed via quantification on the electromechanical admittance variations. In the experimental study, rigorous validation tests were carried out on a group of lab-scale concrete cubes, where surface-bonded PZT/inside-embedded PZT transducers were simultaneously employed for electromechanical admittance monitoring in view of thermal difference between concrete surface and its inner part. Correlation coefficient deviation value-based effective frequency shifts algorithm was also employed to compensate the temperature effect. Moreover, temperature effect was further testified on the monitoring of a full-scale shield-tunnel segment structure. Experimental results indicated that temperature triggered different behaviors of electromechanical admittance signatures for surface-bonded PZT/inside-embedded PZT transducers and contaminated the electromechanical admittance responses for damage detection. Structural damage severity level can be disadvantageously amplified by temperature increment even if under the same damage scenarios.

Crack Monitoring in Concrete Structures Based on Piezoelectric Impedance Technique

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques

Concrete Damage Diagnosis Using Electromechanical Impedance Technique

Crack Detection of FRP-Reinforced Concrete Beam Using Embedded Piezoceramic Smart Aggregates

Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete

Adhesive curing effect of bonded piezoelectric transducer on electromechanical impedance-based concrete structural damage detection

A Cross-Scanning Crack Damage Quantitative Monitoring and Imaging Method

Impedance-Based Damage Detection for Civil Infrastructures

Application of Emi Technique for Crack Detection in Continuous Beams Adhesively Bonded with Multiple Piezoelectric Patches

Sub-Frequency Interval Approach in Electromechanical Impedance Technique for Concrete Structure Health Monitoring

Assessment of Fatigue Damage of Prefabricated Concrete Composite Beams with Piezomagnetic Signal

Piezoelectric-based non-destructive monitoring of hydration of reinforced concrete as an indicator of bond development at the steel–concrete interface

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

Damage Evaluation in Shear-Critical Reinforced Concrete Beam using Piezoelectric Transducers as Smart Aggregates

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Experimental and Analytical Studies for Impedance-Based Smart Health Monitoring of Concrete Structures

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Study on the monitoring method of debonding between concrete beams and reinforced steel plates based on piezoelectric smart materials

Temperature effect on electromechanical admittance–based concrete structural health monitoring

Nonlinear piezoelectric impedance modulation induced by a contact-type failure and its application in crack monitoring