Abstract:The adoption of a numerical method to perform vibration and acoustic analyses is attracting increasing attention because of its merits in saving costs and time. The analysis flow chart of structure-borne noise reduction by controlling the vehicle body panel vibration is proposed. A finite element analysis of a body in white is performed according to this flow chart, using MSC. Nastran, and the experimental modal analysis of a body in white is also carried out. To verify the finite element model, a correlation analysis between the test and the finite element results is performed. After the acoustic boundary element model with seats has been constructed, the acoustic transfer vector is calculated using LMS software. A transfer path analysis is performed to estimate the powertrain and exhaust pipe operational forces at idle. Then the forces are input into the acoustic boundary element model to calculate the body panel velocity. By combining the acoustic transfer vector and the body panel velocity, the interior acoustic response can be obtained. The simulation results are verified by tests. To determine the main contribution panels for the interior sound pressure level, a panel acoustic contribution analysis is based on the boundary element method. Finally, constrained damping treatments are adopted to control the main panel vibration based on the results of the panel acoustic contribution analysis. The test results indicate that the sound pressure level of the interior noise at idle is reduced obviously before and after treatments, which has proved the correctness of the results from the panel acoustic contribution analysis. Therefore it is believed that the proposed analysis method is feasible for reducing interior structure-borne noise.

Noise Analysis of an Lightweight Auto-body Using FEM/BEM

Acoustic Analysis of Lightweight Auto-Body Based on Finite Element Method and Boundary Element Method

Prediction and Control of Structure-borne Noise for Fuel Cell Vehicle Based on FEM/BEM

Acoustic Analysis and Topology Optimization of Auto-body Using CAE Method

Auto-Body Structure Noise Performance Analysis and Optimization Research

3C12 Theory and Method on the Prediction of Car Interior Noise Combined FEM with BEM

Research and Simulation Analysis of Fuel Cell Vehicle Interior Noise

Study of Car's NVH Performance Based on Finite Element Analysis of Car-body

Noise reduction analysis for car body panels based on hybrid FE-SEA method

Investigation on Technology of Automobile Vibration and Noise Reduction Based on Body-In-White Structure

Damping Optimization Noise Reduction Technique Based on Modal and Panel Contribution Analysis

Car Internal Noise Control Using Finite Element Method

Interior Structure-Borne Noise Reduction by Controlling the Automotive Body Panel Vibration

Vehicle’s Low Frequency Noise Prediction and Body Panel’s Acoustic Contribution Analysis

Optimal Design of Damping Material Configuration in Vehicle

Interior Noise Prediction for Fuel Cell Car

Lightweight Design Analysis Based On A Coupled Structural-Acoustic Model For Rectangular Enclosures

Coupled Acoustic-structural Finite Element Analysis of Vehicle Interior Noise Based on Acoustic Sensitivity

The Noise Control of Minicar Body in White Based on Acoustic Panel Participation Method

Finite Element Modeling and Harmonic Analysis of the Bus Bodywork

Research on the Low Frequency Noise Identification and Improvement of SUV in the Pre-Production Stage