Abstract:A fuel cell vehicle (FCV) is a sort of clean energy vehicle with zero emission. And its noise source layout spreads out its front and rear part. As a result, it is called a distributed noise source. Because the interior noise of the FCV is composed of multiple noise sources, the linearity of the interior noise of the FCV is worse than that of the conventional cars. Therefore, the sound quality of the FCV should be improved so that the customers can enjoy the clean energy and comfortable environment simultaneously. Spectral characteristics of noises measured inside the FCV at idle were analyzed. The loudness value was used to evaluate the interior noise of the FCV. Based on evaluation results, the frequency ranges for improving the sound quality of interior noise were put forward. Combined with the spectral analysis results, the parametric filtering method was used to prepare 29 sound samples to find the critical frequency which affected the human ear’s subjective sensation seriously. A virtual validation about the effect of the design parameters on the improvement of the sound quality could be achieved by using this method with advantage of time-saving and cost-dropping and without modifying the physical structure. Hence, the tendency of better solution would be found. Through converting a sound quality problem into a physical problem, a noise source identification experiment was carried out by using a single run method to quantify the noise sources which mainly contribute to the critical frequency of the interior noise spectrum. As a consequence, the main noise sources were identified from the fuel cell auxiliary system.

Interior Noise Prediction for Fuel Cell Car

Interior Noise Prediction Based on Application of Acoustic-Structure Coupled Model of FCV

Research and Simulation Analysis of Fuel Cell Vehicle Interior Noise

Experimental analysis for the interior noise characteristics of the fuel cell car

Interior Noise Evaluation and Noise Source Identification of a Fuel Cell Vehicle Based on Psychoacoustic Parameters

Prediction and Control of Structure-borne Noise for Fuel Cell Vehicle Based on FEM/BEM

Analysis of Vibration of Fuel Cell Car's Traction Motor and the Influence to Interior Noise

The Test Analysis of Internal Noise Characteristics of the Fuel Cell Passenger Car

Transfer path analysis of fuel cell vehicle interior air-borne noise

An Experimental Study on Noise Sources Identification for Fuel Cell Vehicle

Experimental Analysis and Control to the Rear Interior Noise of the Fuel Cell Vehicle

A Study on the Transfer Path of the Interior Noise of a Fuel Cell Car

3C12 Theory and Method on the Prediction of Car Interior Noise Combined FEM with BEM

Vehicle Interior Low Frequency Noise Prediction and Its Control

Vehicle’s Low Frequency Noise Prediction and Body Panel’s Acoustic Contribution Analysis

Prediction of Vibration and Noise in Vehicle Interior Coupled Sound Field

Numerical Prediction of Radiation Noise for Vibrating Shell of a Regenerative Blower in Fuel-cell Vehicles

Analysis of Sound Quality of Low-frequency Noise for Fuel Cell Vehicles

Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

Car Internal Noise Control Using Finite Element Method

Nvh Research Based on Fuel Cell Vehicle