Abstract:The adoption of a numerical method to perform vibration and acoustic analyses is attracting increasing attention because of its merits in saving costs and time. The analysis flow chart of structure-borne noise reduction by controlling the vehicle body panel vibration is proposed. A finite element analysis of a body in white is performed according to this flow chart, using MSC. Nastran, and the experimental modal analysis of a body in white is also carried out. To verify the finite element model, a correlation analysis between the test and the finite element results is performed. After the acoustic boundary element model with seats has been constructed, the acoustic transfer vector is calculated using LMS software. A transfer path analysis is performed to estimate the powertrain and exhaust pipe operational forces at idle. Then the forces are input into the acoustic boundary element model to calculate the body panel velocity. By combining the acoustic transfer vector and the body panel velocity, the interior acoustic response can be obtained. The simulation results are verified by tests. To determine the main contribution panels for the interior sound pressure level, a panel acoustic contribution analysis is based on the boundary element method. Finally, constrained damping treatments are adopted to control the main panel vibration based on the results of the panel acoustic contribution analysis. The test results indicate that the sound pressure level of the interior noise at idle is reduced obviously before and after treatments, which has proved the correctness of the results from the panel acoustic contribution analysis. Therefore it is believed that the proposed analysis method is feasible for reducing interior structure-borne noise.

Vehicle Interior Low Frequency Noise Prediction and Its Control

Interior Noise Prediction Based on Application of Acoustic-Structure Coupled Model of FCV

Prediction of Vibration and Noise in Vehicle Interior Coupled Sound Field

Vehicle’s Low Frequency Noise Prediction and Body Panel’s Acoustic Contribution Analysis

Interior Noise Prediction for Fuel Cell Car

Research and Simulation Analysis of Fuel Cell Vehicle Interior Noise

Investigation on Technology of Automobile Vibration and Noise Reduction Based on Body-In-White Structure

Research on Control of Car Interior Noise due to Engine Vibration

Vehicle Interior High Frequency Noise under Engine Acoustic Excitation

Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

Effect on Low Frequency Noise in Vehicle Interior of Vehicle Body Structure Modification

New Design Method of Car Body to Lower Interior Noise

Interior Structure-Borne Noise Reduction by Controlling the Automotive Body Panel Vibration

Interior Noise Reduction Scheme Based on Phonon Crystal and Its Defect Characteristics

Prediction and Control of Structure-borne Noise for Fuel Cell Vehicle Based on FEM/BEM

Evaluation of Road-Induced Interior Noise of Vehicle Based on Virtual Experiment

3C12 Theory and Method on the Prediction of Car Interior Noise Combined FEM with BEM

Automotive Interior Noise Prediction Based on Single Sound Cavity Using Statistical Energy Analysis Method

Research on the Low Frequency Noise Identification and Improvement of SUV in the Pre-Production Stage

Simulation Of The Autobody Aerodynamics For Car Interior Noise Control

Interior Vehicle Noise Quality Prediction Using Support Vector Machines