Abstract:The surface modification of nano calcium carbonate (nCaCO(3)) particles was carried out with a soluble compound of lanthanum via a coating process of chemical deposition, and nCaCO(3) particles covered with a compound of lanthanum (nCaCO(3)-La) were prepared. The polypropylene (PP)/nCaCO(3) and PP/nCaCO(3)-La composites were prepared with a two-roll mill. The measurements of the mechanical properties showed that the impact strength of the composites increased at first and then decreased with the addition of fillers, and the tensile strength was reduced at the same time. The impact strength of PP/nCaCO(3)-La was higher than that of PP/nCaCO(3), and the impact strength of PP/nCaCO(3)-5La was three times that of virgin PP. Transmission electron microscopy and scanning electron microscopy showed that nCaCO(3)-La dispersed well in the PP matrix, the size distribution of the particles was uniform, and nCaCO(3)-La adhered to the PP matrix very closely. The crystallization properties of virgin PP and its composites were studied with differential scanning calorimetry and wide-angle X-ray diffraction. The results showed that the M-PP phase easily formed with the addition of the lanthanum compound. In comparison with virgin PP, the addition of nCaCO(3)-La led to a higher crystallization temperature. The size of the crystallites increased with the addition of nCaCO(3)-La, and the nucleation of PP crystalline was also improved. (c) 2005 Wiley Periodicals, Inc.

Effect Of Lanthanum On The Tensile Properties Of Carbon-Fibre Reinforced Thermoplastic Polyimide Composites

Effect of Rare Earth Solution on Mechanical and Tribological Properties of Carbon Fiber Reinforced Thermoplastic Polyimide Composite

Effect of Carbon Nanotubes Modified with Different Concentrations of Rare Earth Lanthanum on the Mechanical and Tribological Properties of Epoxy Composites

Investigation of Mechanical Properties for Basalt Fiber/Epoxy Resin Composites Modified with La

Effect of Surface Modification of Poly-P-phenylenebenzobisoxazole Fiber with Lanthanum Salt on Flexural and Tribological Properties of Composite with Polyimide

The Effect of Rare Earth Treatment on Tensile Properties of Carbon Fiber Reinforced Polytetrafluoroethylene Composites

Tribological properties of lanthanum treated carbon fibers reinforced PTFE composite under dry sliding condition

Effect of Rare Earth Surface Modification of Carbon Nanotubes on Enhancement of Interfacial Bonding of Carbon Nanotubes Reinforced Epoxy Matrix Composites

The Effect of Interphase Modification on Carbon Fiber/polyarylacetylene Resin Composites

Effects of Rare Earth Oxide Additive on Surface and Tribological Properties of Polyimide Composites

Effect of Rare Earths on Mechanical and Tribological Properties of Carbon Fibers Reinforced PTFE Composite

Improving Interlaminar Fracture Toughness and Impact Performance of Carbon Fiber/Epoxy Laminated Composite by Using Thermoplastic Fibers

Friction and wear behavior of thermoplastic polyimide reinforced with carbon fiber

Tensile Property of Surface-Treated Poly-P-phenylenebenzobisoxazole (PBO) Fiber-Reinforced Thermoplastic Polyimide Composite

Effect of LaCl3 Surface Modified Carbon Nanotubes on Tribological Properties and Thermal Stability of Carbon Nanotubes-Reinforced Epoxy Resin Composites

Effect of rare earth modifier treatment on interlaminar shear strength of aramid/epoxy composites

The Effect of Lanthanum Trimethacrylate on the Mechanical Properties and Flame Retardancy of Dynamically Vulcanized PP/EPDM Thermoplastic Vulcanizates

Effects of Nano Calcium Carbonate Modified by a Lanthanum Compound on the Properties of Polypropylene

The Effects of Combined Treatments of Laser Engraving, Plasma Spraying and Resin Pre-Coating on Improving the Bonding Strength of Titanium Alloy and Carbon Fiber-Reinforced Polymer

Influence of Rare-Earth-Functionalized Carbon Nanotubes on Thermal and Mechanical Properties of Polytetrafluoroethylene Nanocomposites

Basalt Fiber Modified with Lanthanum-Ethylenediaminetetraacetic Acid As Potential Reinforcement of Cyanate Matrix Composites