Abstract:Poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers possess excellent dielectric, mechanical properties and heat resistance. However, the surface of PBO fibers is smooth and highly chemical inert, resulting in poor interfacial compatibility to polymer matrix, which severely limits its wider application in high-performance fiber-reinforced resin matrix composites. In this work, random copolymers (P(S-co-BCB-co-MMA)) containing benzocyclobutene in the side-chain were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, which were then utilized to form dense random copolymer membrane on the surface of PBO fibers by thermally cross-linking at 250 oC ( fibers). Four kinds of synthesized P(S-co-BCB-co-MMA) with different number-average molar mass (Mn) were well controlled and possessed narrow dispersity. When the Mn was 32300, the surface roughness of fibers was increased from 11 nm (PBO fibers) to 39 nm. In addition, fibers presented the optimal interfacial compatibility with bisphenol A cyanate (BADCy) resins. And the single fiber pull-out strength of fibers/BADCy micro-composites was 4.5 MPa, increasing by 45.2% in comparison with that of PBO fibers/BADCy micro-composites (3.1 MPa). Meantime, fibers still retained excellent tensile strength (about 5.1 GPa). Overall, this work illustrates a simple and efficient surface functionalization method, which would provide a strong theoretical basis and technical support for controlling the surface structure & chemistry of inert substrates.

Tensile Property of Surface-Treated Poly-P-phenylenebenzobisoxazole (PBO) Fiber-Reinforced Thermoplastic Polyimide Composite

Effect of Surface Modification on Mechanical and Tribological Performance of Poly-p-phenylenebenzobisoxazole Fiber-Reinforced Polyimide Composite

The Mechanical Properties of Surface-Treated Poly-P-phenylenebenzobisoxazole Fiber-Reinforced PMMA Composite with TiO2

Effect of Surface Modification of Poly-P-phenylenebenzobisoxazole Fiber with Lanthanum Salt on Flexural and Tribological Properties of Composite with Polyimide

Sliding Friction and Wear Behavior of Thermoplastic Polyimide Composites Filled with Differently Surface-Treated Poly-P-Phenylenebenzobisoxazole Fibers

Improvement of the interfacial shear strength of poly(p‐phenylene benzobisoxazole) fiber/epoxy resin composite via a novel surface coating agent

Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism

Interface Properties of Composites from PBO Fibers Modified by Polyurethane Sizing Agent

Random copolymer membrane coated PBO fibers with significantly improved interfacial adhesion for PBO fibers/cyanate ester composites

Enhanced surface free energy of polyimide fibers by alkali treatment and its interfacial adhesion behavior to epoxy resins

Influence of Plasma Treatment Time on Plasma Induced Vapor Phase Grafting Modification of PBO Fiber Surface

Effect of Rare Earth Solution on Mechanical and Tribological Properties of Carbon Fiber Reinforced Thermoplastic Polyimide Composite

AIR COLD PLASMA MODIFICATION ON PBO FIBER SURFACE

Surface modification of PBO fiber through oxygen plasma induced vapor phase grafting of acrylic acid

Surface Modification of Pbo Fibres by Gamma-Ray Irradiation: Effects on Interfacial Properties of Their Epoxy Composites

Branched Fluorine/Adamantane Interfacial Compatibilizer for PBO Fibers/Cyanate Ester Wave-Transparent Laminated Composites

Surface Analysis of Γ-Ray Irradiation Modified PBO Fiber

Surface Modification Optimization for High-Performance Polyimide Fibers

Improvement of Interfacial Shear Strengths of Polybenzobisoxazole Fiber/epoxy Resin Composite by N‐tio2 Coating

Surface Modification of PBO Fibers by Methanesulfonic Acid

Friction and wear behavior of thermoplastic polyimide reinforced with carbon fiber