Abstract:Abstract To enhance interfacial bonding between carbon fibers and epoxy matrix, the carbon fibers have been modified with multiwall carbon nanotubes (MWCNTs) using the dip- coating technique. FT-IR spectrum of the MWCNTs shows a peak at 1640 cm −1 corresponding to the stretching mode of the C=C double bond which forms the framework of the carbon nanotube sidewall. The broad peak at 3430 cm −1 is due to O–H stretching vibration of hydroxyl groups and the peak at 1712 cm −1 corresponds to the carboxylic (C=O) group attached to the carbon fiber. The peaks at 2927 cm −1 and 2862 cm −1 are assigned to C–H stretching vibration of epoxy produced at the defect sites of acid-oxidized carbon fiber surface. SEM image shows a better interface bonding between the fiber and the matrix of modified composites (MWCNTs-CF/Ep) than those of unmodified composite. The loss factor curve of CF-MWCNTs/Ep composites is the narrowest compared with neat epoxy and CF/Ep composites which evinces that the length distribution range of molecular chain segments in the matrix is the narrowest. From the dependence of the AC conductivity on temperature, we can see that σ AC increases when temperature increases. The increase in electrical conductivity of the composites may be a result of the increased chain ordering due to annealing effect. The use of MWCNTs to modify the surface of carbon fiber resulted in a large amount of junctions among MWCNT causing an increase in the electrical and thermal conductivity by forming conducting paths in the matrix. The MWCNTs-CF/Ep composite shows better thermal stability than unmodified composites. The strong interaction between CF and MWCNTs can retard diffusion of small molecules from the resin matrix at high temperature and hence, result in the improved thermal stability of the modified CF/Ep composite.

Study on the Electromagnetic Properties of Mwcnts/Gf/Epoxy Composites

Study on the electrical behavior of MWCNTs in GF/Epoxy composites.

Electromagnetic properties of MWCNTs/GF/EP composite in 26.5～40 GHz

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

Thermal Conductivity of EP/GNs/MWCNTs Composites

Reinforcing Microwave Absorption Multiwalled Carbon Nanotube–Epoxy Composites Using Glass Fibers for Multifunctional Applications

A Study of the Electromagnetic Properties of Cobalt-multiwalled Carbon Nanotubes (Co-Mwcnts) Composites

The effects of carbon nanotubes on electroactive shape-memory behaviors of hydro-epoxy/carbon black composite

Improved Thermal Conductivity of Epoxy Composites Prepared with A Mixed Filler of Multiwalled Carbon Nanotubes and Aluminum Nitride Particles

Influence of Surface Chemical Groups and Content of Carbon Nanotubes on Electrical Property of Epoxy Resin Composites

Radar Absorbing Property in Eight Millimetre Wave of MWCNTs/GF/epoxy Composites

A Study of the Magnetic and Electromagnetic Properties of Γ-Fe2o3–multiwalled Carbon Nanotubes (MWCNT) and Fe/Fe3C–MWCNT Composites

Effect of MWCNTs on Mechanical Properties of Carbon Fiber Non-Crimp Fabric/epoxy Laminates

Electrical and thermal characteristics of MWCNTs modified carbon fiber/epoxy composite films

Mechanical and Electrical Properties of a MWNT/epoxy Composite

Microwave Absorbing and Mechanical Properties of MWNTs/Epoxy

Epoxy/ionic Liquid-Like MWCNTs Composites with Improved Processability and Mechanical Properties

Study on Electromagnetic Properties of Ni-MWNTs Filling High Dielectrical EP Composites

Insight into the mechanical properties and thermal expansion behavior of epoxy nanocomposites reinforced with multi‐walled carbon nanotube solvent‐free nanofluids

Combined Effect of Graphene Oxide and Mwcnts on Microwave Absorbing Performance of Epoxy Composites