Abstract:Laminated composite structures, while offering weight savings compared with their metal counterparts, are susceptible to ply separation, (i.e., delamination mode of failure) due to the lack of through-thickness fiber reinforcements. In this paper, numerical simulations are used to gain an enhanced understanding of angled composite beam delamination when subjected to four-point bending consistent with the ASTM D-6415 test standard, with an expectation that the learning gained from this work is extensible to laminated composite components in general. While illustrating mesh sensitivity, manufacturing and frictional effects, four items of interest are examined: (1) the undamaged state/pre-peak load response, (2) the through-thickness peak tensile capability, (3) the post-peak load drop, and (4) the subsequent post-peak damaged response. A Finite Element Analysis (FEA) model is developed that incorporates the Smeared Crack Approach (SCA) to capture progressive failure modes within the element formulations directly, effectively eliminating the need for a priori specification of discrete delamination zones. The ability to incorporate failure directly within the element structure is particularly notable where laminates may not realistically permit a high number of interface layers or where geometry may be complex. Leveraging experimental data of curved composite laminates subject to four-point bending, the proposed approach successfully predicts the correct behavior throughout the damage progression. Additionally, this study offers an insight into effects of manufacturing-induced imperfections and frictions between the specimen and fixture on the prediction of inter-laminar strength of a curved composite part.

DYNAMIC BUCKLING OF LAMINATED COMPOSITE BAR WITH DELAMINATION SUBJECT TO AXIAL STRESS WAVES

Post-Buckling Response of Carbon/Epoxy Laminates with Delamination under Quasi-Static Compression: Experiments and Numerical Simulations

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Buckling instability analysis of delaminated beam-like structures by using the exact stiffness method

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

High Order Perturbation Solution of Delamination Buckling

On the Through-the-Width Multiple Delamination, and Buckling and Postbuckling Behaviors of Symmetric and Unsymmetric Composite Laminates

Modeling delamination growth in laminated composites

Application of a delamination model to laminated composite structures

BUCKLING ANALYSIS OF SIMPLY SUPPORTED DELAMINATED BEAMS BASED ON ELASTICITY THEORY

Finite Element Analysis of the Influence of Cohesive Law Parameters on the Multiple Delamination Behaviors of Composites under Compression

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

The effect of delamination on damage behavior of composite laminates subjected to three-point bending

Progressive failure simulation of angled composite beams subject to flexural loading

DELAMINATION INTERACTION IN LAMINATED STRUCTURES

On the Distribution of Delamination in Composite Structures and Compressive Strength Prediction for Laminates with Embedded Delaminations

ELASTICITY SOLUTION OF SIMPLE-SUPPORTED COMPOSITE BEAMS WITH DELAMINATIONS

Delamination buckling of stitched laminates

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure

An Extended Layerwise Method For Composite Laminated Beams With Multiple Delaminations And Matrix Cracks

ANALYSIS ON COMPRESSION BUCKLING OF STITCHED ORTHOTROPIC LAMINATES INCLUDING ARBITRARY DELAMINATION