Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold
Wenjie Rong,Liang Qiu,Zhongqiu Liu,Baokuan Li,Chengjun Liu
DOI: https://doi.org/10.1002/srin.202300714
IF: 2.1258
2024-03-15
steel research international
Abstract:The characteristic positions of flow pattern, vortex centers in upper/lower recirculation zones, and impingement points on the narrow face of mold are identified, and their distribution in double roll flow and complex flow is analyzed. The interactive effect of casting speed, argon flow rate, and immersion depth of the submerged entry nozzle on the flow pattern is revealed. The flow pattern in an opaque mold cannot be readily visible, and worker experience plays a major role in controlling it, even though it has a significant impact on slab quality in a continuous casting (CC) mold. An Eulerian–Eulerian two‐fluid model is used to comprehensively study the two‐phase flow of argon and molten steel in a slab CC mold. The positions of vortex centers in upper/lower recirculation zones and the impingement point of jet flow on the narrow face of mold are identified and their distribution is analyzed. The interactive effects of casting speed, argon flow rate, and immersion depth of the submerged entry nozzle (SEN) on the flow pattern inside the mold are revealed. 2D and 3D flow pattern regimes are plotted and the boundary lines and boundary surfaces are fit with exponential functions and ternary functions, respectively. To obtain a double roll flow in the slab CC mold investigated, the relation among argon flow rate (Qg ), casting speed (Cl ), and the immersion depth of the SEN (SSEN ) should satisfy, Qg
metallurgy & metallurgical engineering