Abstract:The accuracy of microwave ranging is mainly limited by the frequency instability of the oscillator that generates the carrier phase signal. A dual transponder carrier ranging method is used to minimize the oscillator noise by combining the reference and the to-and-fro measurements. This ranging approach together with pseudo-noise ranging or other means can be used to measure the inter-satellite distance with a high precision. The pseudo-noise ranging system or other ranging systems help to solve the integer circles while the dual transponder ranging system guarantees the accurate fractional circle. The two satellites work in the master-slave mode. The range measurements are derived on the master satellite while the slave satellite just coherently transfers the received signal, so that the dual transponder ranging system does not need to rely on the time tagging system to synchronize the two satellites. This study first describes the dual transponder carrier ranging system and shows how the system removes most of the oscillator noise components effectively. Then, a detailed design scheme on the frequency planning of the ranging system is presented and the supporting analysis illustrates the feasibility of this system. Based on the design innovation, a laboratory demonstration system is assembled to verify the realizability of the dual transponder ranging system. The experimental results demonstrate that a high level of accuracy (about 30 μm under laboratory circumstance) can be achieved by the use of the proposed dual transponder carrier ranging system.

Study on the Tracking Accuracy of Regenerative Ranging Codes Used in Micro-Satellite Transponders

Method of Code Tracking Loop Bandwidth Stabilization Adjustment for Inter-satellite Ranging System

An Effective SNR Promotion Method for Mini-Satellite Pseudo-Code Range Measurement

Effect of Processing Rate on Regenerative Clock Jitter Performance in Pseudo-Random Code Ranging

Impact of Data Channel on Tracking Performance of Pseudo-Code Tracking Loop

PN Code Tracking Based on Sub‐nyquist and Non‐commensurate Sampling

Analyses of Noncommensurate Sampling Used in High-Precision Regenerative Pseudo-Noise Ranging Systems

Optimal Regenerative PN Code Tracking Based on Non‐commensurate Sampling and Double‐loop Structure

Modified Pseudo-Noise Code Regeneration Method

Performance Analysis of a Novel Chip Tracking Loop Used for Regenerative Pseudo-Noise Ranging Clock Recovery

Pseudo-Code Ranging Signal Waveform Design

Effect of Chip Rate on the Ranging Accuracy in A Regenerative Pseudo-Noise Ranging System

Design and Derivation of the Dual Transponder Carrier Ranging System

Simulation of Dual Transponder Carrier Ranging Measurements

Dual Transponder Ranging Performance in the Presence of Oscillator Phase Noise

Integrated Method for Measuring Distance and Time Difference Between Small Satellites

Performance Analysis of Chip Tracking Loop Using TDRC Waveform Pseudo-Number Code

Research of High Accuracy Ranging System Between Pico-Satellites

Effect on Pseudo Code Ranging Precision by A/D Sampling Clock Jitter

Design, Analysis and Optimization of Random Access Inter-Satellite Ranging System

Design of variable loop bandwidth high sensitivity micro-satellite receiver