Abstract:To investigate the turbulence combustion characteristics of NH3/H2/Air in a multiple direct-injection combustor, the effects of equivalence ratio and hydrogen mixing ratio on the mixing characteristics of fuel–air in the mixing-nozzles as well as the flame and emission characteristics in the combustor are analyzed numerically. The results show that the spatial mixing deficiency of fuel–air mixture at the mixing-nozzle outlet is below 1% under all circumstances, which indicates that the mixing-nozzle exhibits satisfactory mixing performance and is capable of achieving the premixed combustion. Furthermore, the intensity of gas turbulence at the mixing-nozzle outlet (inlet of the combustor) is primarily affected by the gas flow within the fuel collision zone. Regarding the flame characteristics, the larger equivalence ratio increases the NH3 concentration (reducing combustion rate), and the larger hydrogen mixing ratio increases the gas turbulence intensity at the mixing-nozzle outlet (increasing gas flow velocity), which disrupts the stabilized combustion. Moreover, the reaction R18, NH3 + M ⇔ NH2 + H + M, inhibits NH3 consumption and the reactions R20, NH3 + O ⇔ NH2 + OH, and R21, NH3 + OH ⇔ NH2 + H2O, promote NH3 consumption, while R19, NH3 + H ⇔ NH2 + H2, initially inhibits and later promotes NH3 consumption, but primarily plays an inhibitory role. Furthermore, reactions R4, NH + H ⇔ N + H2, R11, NH2 + H ⇔ NH + H2, and R28, HNO + H ⇔ NO + H2, promote the H2 formation, and R19, NH3 + H ⇔ NH2 + H2, inhibits the H2 formation. As for the emission characteristics, R16, NH2 + NO ⇔ N2 + H2O, and R28, HNO + H ⇔ NO + H2, inhibit and promote NO generation in the upstream region of the combustor, respectively, while R36, NO2 + H ⇔ NO + OH, promotes NO generation in the whole area.

Influence of Different Structure and Multiple Injections on the Annular Combustor Performance

Experimental study on thermoacoustic performance of radial staged combustor

Numerical Investigation Of High Speed Combustion And Its Impact On Thermal Structure

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Influence of Cyclone Combustor Structure on the Motion Behaviors of Solid Fuel Particles

Influences of device for flame joint and flow stabilization on performance of trapped vortex combustor

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Effect of Different Nozzle Arrangements on Combustion Flow Characteristics in a Swirl Coupling Multiple Direct Injection Combustor

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Experimental Investigation on the Ignition Dynamics of an Annular Combustor with Multiple Centrally Staged Swirling Burners

Direct Numerical Simulation Of Turbulence Modulation By Premixed Flames In A Model Annular Swirling Combustor

Numerical Simulation of Three-Dimensional Combustion Flow in a Gas Turbine Annular Combustor

Ignition Dynamics in an Annular Combustor with Gyratory Flow Motion

Numerical Investigation on NH 3 /H 2 /Air Combustion Flow in a Multiple Direct-Injection Combustor

Computational modeling of the rectangular non-aligned multi-injector for efficient fuel mixing in a supersonic combustion chamber

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector

Numerical Investigation of Hydrogen Combustion in a Chamber with Guide Ring and Double Jets

Experimental investigation of the ignition dynamics in an annular premixed combustor with oblique-injecting swirling burners

Numerical Simulations and Optimization of a Micro Annular Combustor