Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

The Implementation Of A Novel Adaptive Beam-Forming Method Based On Lms Algorithm

Latency Minimization for Mmwave D2D Mobile Edge Computing Systems: Joint Task Allocation and Hybrid Beamforming Design.

Steerable Simultaneous Multibeam Antenna Based on Reconfigurable Reflectarray

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

Performance of Beamforming for Smart Antenna using Traditional LMS Algorithm for Various Parameters

Radio Frequency Beamforming Based on a Complex Domain Frontend

A Real-Time Adaptive Station Beamforming Strategy for Next Generation Phased Array Radio Telescopes

Beam Selection for RIS-Enabled Terahertz Multi-User MIMO Systems via Multi-Task Learning

An Efficient Approach for Adaptive Multibeam Forming Algorithm

STUDY AND ANALYSIS OF AN ADAPTIVE BEAMFORMING FOR SMART ANTENNA USING LMS ALGORITHM

Sparse Array Beamformer Design via ADMM

Beamforming Scheme for Smart Antenna by Using Base-Band Amplitude Weighing and Performance Analysis in CDMA

A quasi-newton-based adaptive beamforming algorithm for antenna array of CDMA systems

A High-Accuracy Adaptive Beam Training Algorithm for MmWave Communication.

Virtual Reconstruction-Based Robust Adaptive Beamforming for Distributed Digital Subarray Antennas

A Multi-reference Extended Variable Step-size LMS Algorithm for Solving Dynamic Weighting Coefficients of the Satellite Beam-forming Networks

A Novel Digital Beamformer Applied In Vehicle Mounted Hf Receiving Device

Beamfocusing Optimization for Near-Field Wideband Multi-User Communications

Implementation of the Digital QS-SVM-based Beamformer on an FPGA Platform

Towards Efficient Subarray Hybrid Beamforming: Attention Network-based Practical Feedback in FDD Massive MU-MIMO Systems

Advanced Interference Mitigation Method Based on Joint Direction of Arrival Estimation and Adaptive Beamforming for L-Band Digital Aeronautical Communication System