Abstract:The L-band digital aeronautical communication system (LDACS) is one of the candidate technologies for future broadband digital aeronautical communications, utilizing the unused L-band spectrum between distance measuring equipment (DME) channels. However, the higher signal power of DME complicates LDACS implementation. This paper proposes an advanced DME mitigation approach for the LDACS, integrating joint direction of arrival (DOA) estimation with adaptive beamforming techniques. The proposed method begins by exploiting the cyclostationary characteristics of signals, accurately obtaining the preliminary direction of the LDACS signal using the Cyclic-MUSIC method. Subsequent precise steering vectors (SVs) are selected through Capon spectrum search, followed by the reconstruction of the interference plus noise covariance matrix (INCM). Using the obtained SV and INCM, the weight vector is calculated and beamforming is performed. Simulation results validate that the proposed method not only accurately estimates the direction of LDACS signal but also efficiently mitigates DME interference, demonstrating a superior performance and reduced algorithmic complexity, even in scenarios with lower signal-to-noise ratios (SNRs) and the presence of DOA estimation errors. Additionally, the proposed method achieves a low bit error rate (BER), further validating its ability to ensure communication quality and enhance the reliability of LDACS.

What problem does this paper attempt to address?

This paper attempts to solve the problem that the L - band Digital Aeronautical Communication System (LDACS) is interfered by Distance Measuring Equipment (DME) pulse signals when receiving signals. Specifically, the paper proposes an advanced DME suppression method based on joint Direction - of - Arrival (DOA) estimation and adaptive beamforming to improve the communication quality and reliability of the LDACS system. ### Problem Background With the rapid development of the civil aviation transportation industry, the demand for advanced Air Traffic Management (ATM) systems is increasing day by day. However, the existing communication links are affected by spectrum limitations in supporting these ATM systems. To ensure the sustainable development and safety of aviation services, the Future Communication Infrastructure (FCI) proposes the LDACS system based on Orthogonal Frequency - Division Multiplexing (OFDM) technology. According to the plan of the International Civil Aviation Organization, the LDACS system is embedded and deployed between the L - band DME channels, which brings the problem of DME pulse signal interference to the receiving end. ### Existing Solutions and Their Limitations At present, researchers have proposed a variety of methods to reduce the mutual influence between the LDACS and DME systems, such as pulse blanking and clipping strategies. These methods are based on the time - domain characteristics of DME signals and eliminate or limit the received signal components exceeding the threshold by setting a threshold. However, in practical applications, setting an appropriate threshold is challenging and may lead to signal loss and Inter - Carrier Interference (ICI). In addition, some studies have explored the use of methods such as compressed sensing, wavelet transformation, and orthogonal transformation to reconstruct DME signals, but these methods have problems such as reconstruction errors and residual interference. ### The Solution Proposed in the Paper To solve the above problems, the paper proposes an advanced DME suppression method that combines DOA estimation and adaptive beamforming. The specific steps are as follows: 1. **Utilize the Cyclostationary Characteristics of Signals**: First, accurately obtain the preliminary direction of the LDACS signal through the Cyclic - MUSIC algorithm. 2. **Accurately Select Steering Vectors (SVs)**: Select accurate steering vectors through Capon spectral search. 3. **Reconstruct the Interference - plus - Noise Covariance Matrix (INCM)**: Use the obtained SV and INCM to calculate the weight vector and perform beamforming. 4. **Beamforming**: Use the calculated weight vector to perform beamforming, form a high - gain main lobe pointing in the direction of the OFDM signal, and form a deep zero at the DME interference location to effectively suppress DME interference. ### Experimental Results The simulation results verify that this method can not only accurately estimate the direction of the LDACS signal, but also efficiently suppress DME interference, showing superior performance and low algorithm complexity, even in the case of low Signal - to - Noise Ratio (SNR) and the existence of DOA estimation errors. In addition, this method also achieves a low Bit - Error Rate (BER), further verifying its ability to ensure communication quality and enhance the reliability of the LDACS system. In summary, this paper aims to solve the problem that the LDACS system is interfered by DME pulse signals when receiving signals, and proposes an advanced DME suppression method that combines DOA estimation and adaptive beamforming to improve communication quality and reliability.

Advanced Interference Mitigation Method Based on Joint Direction of Arrival Estimation and Adaptive Beamforming for L-Band Digital Aeronautical Communication System

Latency Minimization for Mmwave D2D Mobile Edge Computing Systems: Joint Task Allocation and Hybrid Beamforming Design.

Cross Power Spectral Density Based Beamforming for Underwater Acoustic Communications

DOA Estimation Method Based on EMD and MUSIC for Mutual Interference in FMCW Automotive Radars

Integrated Sensing and Communication Beamforming Design Based on Mutual Information

Physical Layer Security for L-Band Digital Aeronautical Communication System with Interference Mitigation

Joint Beamforming and Power Control for D2D-Assisted Integrated Sensing and Communication Networks

A Novel Adaptive Digital Beamforming Method Based on Beam-Space Phase-Center Cross Correlation

Intra-Beam Interference Mitigation for the Downlink Transmission of the RIS-Assisted Hybrid Millimeter Wave System

Spectral Coexistence of LDACS and DME: Analysis via Hardware Software Co-Design in Presence of Real Channels and RF Impairments

Robust Wideband Interference Suppression Method for GNSS Array Antenna Receiver via Hybrid Beamforming Technique

Partially-Connected Hybrid Beamforming Design for Integrated Sensing and Communication Systems

DOA Estimation-Oriented Joint Array Partitioning and Beamforming Designs for ISAC Systems

Hybrid Robust Beamforming Against DoA Estimation Mismatch and Moving Interference

Delay Alignment Modulation with Hybrid beamforming for Spatially Sparse Communications

High-performance deep-sea long-range underwater acoustic communication: Deconvolved conventional beamforming based approach

ROAD value-based detection for GAE enhanced interference mitigation in LDACS

Intelligent Reflecting Surface Assisted Interference Mitigation for Cellular-Connected UAV

Symbiotic Sensing and Communication: Framework and Beamforming Design

Machine-Learning-based High-resolution DOA Measurement and Robust DM for Hybrid Analog-Digital Massive MIMO Transceiver.

Joint Sparse Beamforming and Power Control for Large-scale DAS with Network-Assisted Full Duplex