Abstract:Hard carbon (HC) is considered to be an anode material with great promise for sodium-ion batteries (SIBs), on account of the advantages of high reversible specific capacity and abundant source. Nevertheless, its poor high-rate and long-term cycle performance, which were caused by the unrestricted decomposition of the electrolyte and sustained formation of the solid–electrolyte interface (SEI) film, limit the practical use. Herein, the balance between high mechanical strength and good flexibility of the SEI layer formed in the discharge/charge process was achieved by modifying the surface of the HC anode with a proper amount of AlF3 coating. In this way, the reversible specific capacity increased from 322 to 346 mA h g–1 at 20 mA g–1. Furthermore, the capacity retention at 100 mA g–1 for 100 cycles of the modified sample considerably increased from 47.4 to 76.5%, as well as rate performance was significantly improved from 69 to 135 mA h g–1 at 200 mA g–1. The improvement of performance is mainly attributed to the rational distribution of organic–inorganic phase components in the SEI film (about 43% inorganic phase and 57% organic phase), which ensures the stability of the SEI layer in the continuous discharge/charge process, resulting in a superior performance. Therefore, this work not only provides an effective method to synthesize HC anode with high electrochemical performance in SIBs but also clearly illustrates the mechanism of how the coating affects the composition of the SEI film to improve the performance of materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01497.SEM images of HC particles; PSD diagram; TG curve; XRD pattern and Raman spectrum photograph; infrared spectra; EDS spectrum of the profile and EDS images of the electrode surface after five cycles; CV curves and rate capability diagram under different experimental conditions; and charge–discharge curves and cycle performance diagram at 20 mA g–1 of 3.0 wt % 3 (PDF)This article has not yet been cited by other publications.

Electrochemical Performance of Conducting Polymer Coated Hard Carbon Via In-Situ Polymerization

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

Epoxy resin-derived N, P co-doping hard carbon with improved yield and anode performance in Li-ion battery

Solid Electrolyte Interphase Composition Regulation via Coating AlF 3 for a High-Performance Hard Carbon Anode in Sodium-Ion Batteries

Conductive Polymer Coated Cathodes in Li–O2 Batteries

Hard Carbon Coated Nano-Si/graphite Composite As a High Performance Anode for Li-ion Batteries

Improving the Performance of Lithium-Sulfur Batteries by Conductive Polymer Coating.

Study of Lithiation Mechanisms of High Performance Carbon-Coated Si Anodes by In-Situ Microscopy

Enhancing the sodium storage performance of hard carbon by constructing thin carbon coatings via esterification reactions

Lithium polyacrylate polymer coating enhances the performance of graphite/silicon/carbon composite anodes

Enhanced Electrochemical Performances of Hard Carbon via Nickel‐Metal Catalyzed Surface Conversion Graphitic Crystallites

Hard Carbon/lithium Composite Anode Materials for Li-ion Batteries

Elucidating the Mechanism Involved in the Performance Improvement of Lithium‐Ion Transition Metal Oxide Battery by Conducting Polymer

Chemically Prelithiated Hard-Carbon Anode for High Power and High Capacity Li-Ion Batteries.

Polyimide-Derived Carbon-Coated Li4Ti5O12 as High-Rate Anode Materials for Lithium Ion Batteries

Hard Carbon/Li2.6co0.4n Composite Anode Materials for Li-Ion Batteries

Extended Plateau Capacity of Hard Carbon Anode for High Energy Lithium‐Ion Batteries

Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

In Situ Revealing the Electroactivity of P ? O and P ? C Bonds in Hard Carbon for High‐Capacity and Long‐Life Li/K‐Ion Batteries

Ameliorating the Sodium Storage Performance of Hard Carbon Anode Through Rational Modulation of Binder