Abstract:The heat utilization efficiency of heat injection is a key factor for the available heat stimulation method in natural gas hydrate, and the heat transfer characteristics during natural gas production from hydrate reservoir require further analysis. In this work, based on the laboratory tests by the Pilot Hydrate Stimulator (PHS), the heat transfer process of hydrate decomposition in the PHS was investigated, and the real-time decomposition rate and the energy utilization efficiency of the hydrate decomposition were quantitatively studied. The experimental results showed that the energy consumption of hydrate decomposition was mainly obtained from the sensible heat hydrate bearing sediments and the heat transfer from the environment in the depressurization process. In the initial stage of heat injection, the energy consumption of hydrate decomposition mainly came from the heat contained in the injected hot water and the heat transfer through the boundaries. In the later stage of heat injection, all of the energy consumption for hydrate decomposition was obtained from heat injection. In this work, the heat transfer coefficient between the reservoir and the environment was first proposed to quantify the heat transfer through the boundary. The results showed that the heat transfer coefficient presented large fluctuations during the initial stage of the depressurization and the period when the reservoir temperature reached the environment temperature in the heat injection process. Meanwhile, the coefficient remained stable at the later stage of heat injection. These results indicated that the change in gas-water hydrate inside the reservoir and the change in reservoir temperature affected the heat transfer coefficient between the reservoir and the environment. Furthermore, the energy utilization efficiency and gas production rate were optimized for hydrate production when the reservoir temperature was controlled within the range close to the environmental temperature. These results may be of great significance for heat injection control during field production from hydrate reservoirs.

Research of optimal parameter of fluid-jacket heater and depression of gas consumption

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

Optimization and energy-saving of steam systems

Fluid Flow in the Enhancement of Gas Hydrate Production Via the Heat Injection Method

Numerical Study on Natural Gas Hydrate Production by Hot Water Injection Combined with Depressurization

Multi-parameter optimization of mixed refrigerant circulation system in natural gas light hydrocarbon removal system

Optimization of Energy Consumption in the Process of Dehumidification of Natural Gas

Simulation and Optimization of Gathering Pipeline Utilizing Electric Tracing at the Pipeline Center

Optimization of a Typical Gas Injection Pressurization Process in Underground Gas Storage

Optimal Design and Thermo-Economic Analysis of an Integrated Power Generation System in Natural Gas Pressure Reduction Stations

Energy consumption analysis of condensation refueling gas recovery technique

Design Optimization of Gas Separator in High Temperature Gas Cooled Reactor through Numerical Simulation Method

Optimization of the natural gas hydrate hot water injection production method: Insights from numerical and phase equilibrium analysis

Experimental Analysis of the Hydrate Dissociation Assisted by the Deep Gas Heat Transported Through the Circulating Water

Heat utilization efficiency analysis of gas production from hydrate reservoir by depressurization in conjunction with heat stimulation

Strengthening the Energy Efficiency Ratio of Warm Deep Gas-Assisted Hydrate Production Through Optimizing Water Circulation

Research of flow field in large cylinder natural gas heating furnace and optimized arrangement of heat exchanging areas

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Research and application on the gathering and transportation radius chart of multi-phase pipelines in high water cut stage

Simulation of gas injection-heating process of in situ combustion

Joule-Thomson effect and flow behavior for energy-efficient dehydration of high-pressure natural gas in supersonic separator