Abstract:Abstract This paper analyses the flow characteristics and oil-air distributions of oil flows in a tilting-pad journal bearing under different bearing loads. This titling-pad journal bearing is working at 3000 rpm rotation speed and its minimum film thicknesses have been measured under different loads from 180 kN to 299 kN. Based on the previous researches of this bearing under 180 kN, the gaseous cavitation and low-turbulence flow exists in this bearing flow. A suitable gaseous cavitation model and the SST model with low-Re correction are used in the film flow simulations. With the rotor and pads assumed to be rigid, the dynamic mesh and motion equations are applied to simulate the motions of the rotor and the rotations of the pads. Based on the simulation results under different bearing loads, the simulated minimum film thicknesses agrees well with the measured data. It indicates that the simulation results can catch the film geometries and flows correctly. With the load increasing, the rotor moves closer to the loaded pads and the minimum film thickness decreases. Taking the effect of boundary layers into consideration, the turbulence has a negative relationship with the film thickness and decreases in the loaded area under higher bearing load. It can be verified by the simulated lower turbulent viscosity ratio distributions in the loaded pads. In the unloaded area, both the film thickness and turbulence viscosity ratio are positively related to the bearing loads. Thus, the higher bearing load may lead the flow to be more different in the loaded and unloaded area, and the turbulence in the loaded pads may transfer to laminar in the end. As for the oil-air distributions, in the unloaded pads, with the bearing load increasing, the simulated air volume fraction increases in the unloaded pads with lower pressure. It should be caused by the higher film thickness of the unloaded pads under higher loads. In sum, the flow turbulence and cavitation process changes with the bearing load. With a higher load, the cavitation becomes more in the unloaded pads and the flow changes sharper from the high-turbulence unloaded area to the low-turbulence loaded area. As the simulation results is in good accordance with the experimental data, the SST model with low-Re correction and the gaseous cavitation model are verified to be suitable for bearing film simulations under different loads.

Load Calculating Methods of Main Journal Bearings of Turbo Charged Multi-Cylinder IC Engine and its Effects on Orbit

Influence of practical complications on lubrication of main journal bearings in multi-cylinders ICE

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Analysis of Factors Affecting Lubrication Performance of Main Bearings of Service Diesel Engine Based on Orthogonal Design Method1

Elastohydrodynamic Simulation Analysis of the Main Bearing in Internal Combustion Engine

Experimental Research on a Three-Dimensional Journal Orbit of a Crankshaft Bearing for an Internal Combustion Engine

Numerical Investigation for Characteristics and Oil-Air Distributions of a Tilting-Pad Journal Bearing Under Different Loads

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Experimental Study on Oil Film Thickness of Main Bearings in Multi-Cylinder IC Engines

Effect of Performance Intensifying of ICE on the Wearing of Crankshaft

Mixed Thermo-Elasto-hydrodynamic Lubrication and Wear Coupling Simulation Analysis for Dynamical Load Journal Bearings

Exploring Lubrication Influence Factors of Big End Bearing of Connecting Rod with Orthogonal Experimental Design Method

Investigation on Lubrication Characteristics of Main Bearings in Gasoliine Engine Based on Multi-Body Dynamic and Kriging Modeling

Research on the thermohydrodynamic lubrication performance of engine main bearing with rough surface considering the axial motion and deformation of crankshaft

Analysis on Load Distribution and Life Calculation for Aeroengine Roller Bearings

Analysis of maximum radial load capacity of hydrostatic journal bearing considering supply pressure limitation by a novel method

Influence of balancing of internal combustion engines on the operating conditions of hydrodynamic bearings

Experimental study on the effect of post-injection parameters on performance of extra-high pressure common-rail diesel engine

The Numerical Analysis on the Load Capacity of Aerodynamic Tilting-pad Journal Bearings

Effect of Boundary Conditions on the Performances of Gas-Lubricated Micro Journal Bearing