Abstract:Methanol is a potential alternative fuel for heavy-duty engines to effectively reduce carbon emissions. On the other hand, unregulated emissions from methanol-fueled engines are harmful to the environment. The formaldehyde emission mechanism was investigated in this paper using a premixed laminar combustion experiment and a plug flow reactor (PFR) simulation with a detailed mechanism. Furthermore, the engine test was carried out on a heavy-duty spark ignition (SI) pure methanol engine with EGR to study the effects of the injection strategy, exhaust gas recirculation ratio (EGR), engine load, and speed on unregulated emissions. The high-pressure loop EGR system and port fuel injection system were adopted. Unregulated emissions were measured using a GC-2010 gas chromatography analyzer with a pulsed discharge helium ionization detector (PDHID) and Gs-OxyPLOT. Formaldehyde emission is the post-oxidation production of unburned methanol, according to the experiment and simulation, and it increases first, then decreases as the temperature rises. Unregulated emissions mainly consist of methanol and formaldehyde. The injection timing can be divided into two groups: 120 degrees CA to 300 degrees CA and 360 degrees CA to 780 degrees CA, where 0 degrees CA represents fire TDC. The BTE at alpha(inj) of 120 degrees CA to 300 degrees CA is lower than that at other alpha(inj), while methanol and formaldehyde emissions are the opposite. The temperature of unburned methanol post-oxidation is affected by engine speed, load, and EGR ratio, affecting methanol and formaldehyde emissions. The higher exhaust temperature caused by the higher engine speed, load and a lower EGR ratio can reduce methanol emissions. The nonmonotonic trends of formaldehyde emission with the EGR ratio and the different influences of EGR on the formaldehyde emission under different engine loads are the result of the nonmonotonic relationship between formaldehyde emission and temperature. The engine experiment results are consistent with the PFR simulation.

Study on the Emission Characteristic of a Methanol Fuel Gasoline Engine

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Study on the Emission Characteristic of Methanol-Gasoline Blend Fuel on EFI Engine

Study on Carbonyl Compounds Emissions from a Methanol Engine

Study on the Performance of Methanol Engine

A Study on the Combustion and Methanol and Formaldehyde Emission Characteristics of Methanol Gasoline Engine

Aldehydes and Methanol Emission Mechanisms and Characteristics from A Methanol/Gasoline-Fueled Spark-Ignition (si) Engine

A Comparative Study on the Transient Emission Characteristics of Methanol Engine and Gasoline Engine

Experimental Investigation of Unregulated Emissions Using Low-Percent Methanol-Gasoline Blend Fuels

Unregulated Emissions and Combustion Characteristics of Low-Content Methanol−Gasoline Blended Fuels

Effects of Methanol/Gasoline Blends on a Spark Ignition Engine Performance and Emissions

Comprehensive Study on Unregulated Emissions of Heavy-Duty SI Pure Methanol Engine with EGR

Effects of Methanol-Gasoline Improved Fuel on the Performance of Gasoline Engine

Experimental Investigation on the Emissions of a Port Fuel Injection Spark Ignition Engine Fueled with Methanol–Gasoline Blends

Effect of Methanol-gasoline Blend on Engine Performance and Carbon Emission of Gasoline Engine Under China Ⅲ Emission Standard

Regulated emissions from a direct-injection spark-ignition methanol engine

Unregulated Emissions Characteristics of a Gasoline Direct Injection Vehicle Fueled with Methanol Gasoline

Performances of electronic fuel injection engine fueled with methanol-gasoline blended fuel

Contribution Ratio Study of Fuel Alcohol and Gasoline on the Alcohol and Hydrocarbon Emissions of a Gasohol Engine

Investigation on Emission Characteristics of Methanol Vehicle's Aldehyde and Ketone Pollutants

Effects of Methanol-Gasoline Blend on Emission Characteristics of Gasoline Engine in National Grade III Standard