Abstract:Aggressive salts contained in formation waters accelerate the processes of corrosion and salt deposition in oilfield equipment, which leads to unforeseen accidents, contamination of soil and groundwater with harmful substances, as a result of which the ecological balance of the environment is disrupted. Corrosion and scaling that occur during oil production create difficulties during the operation of wells, and, consequently, increase the cost of produced oil.This article covers the results of studies concerning two compositions developed from technical phosphatide - an emulsion obtained by hydration of vegetable oils, as well as sodium hexametaphosphate, ammophos and polypropylene glycol bottoms. When vegetable oils are treated with water and steam (hydration process), the phospholipids contained in the oils combine with water and are released in the form of precipitates called phosphatide emulsions. Such emulsions consist of 45–75 % water, and the rest is phospholipids in the vegetable oil sediment.Technical phosphatides are a group of esters that contain a phosphoric acid residue associated with an amino alcohol. They are natural surfactants and are non-toxic.Preliminary studies have shown that each of the chemical compounds included in the developed reagents has certain inhibitory properties, but when formulated, these compounds provide a synergistic effect.Based on the results of laboratory studies, it was found that at an optimal concentration of reagents of 200 mg/l, the developed compositions provide protection of equipment from corrosion destruction by 94–95 %, and from scaling by 87–88 %. The developed mixed-type inhibitors at optimal concentrations equally effectively inhibit both cathodic and anodic processes on the electrode.The use of these inhibitors leads to the prevention of steel corrosion in the two-phase oil-electrolyte system, as well as to a significant reduction in the rate of scaling.The proposed new compositions can be used in oil wells and in-field transport systems, as well as in reservoir pressure maintenance systems to protect against corrosion and scale deposits.Field tests of the corrosion inhibitor were carried out in deep pumping wells at the Bibieybatneft oil and gas production department. Tests have shown that as a result of using the inhibitor, the protective effect at a concentration of 200 mg/l was 89–90 %, and the effect of salt deposition was 70 %.

Study on inhibition mechanism of a new kind of corrosion inhibitor of phosphine-methyl-acidamide used in oil-field sewage

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Synergistic effect of new imidazoline derivative and 2‐aminopyridine as corrosion inhibitors for Q235: Experimental and theoretical study

Electrochemical characteristics of the N,N-dipropynoxy methyl amine trimethyl phosphonate on pure iron in sulfuric acid solution

Research on the corrosion inhibition performance and mechanism of pyrimidine quaternary ammonium salt

Inhibition and Desorption Behaviour of N,N-Dipropynoxy Methyl Amine Trimethyl Phosphonate in Hydrochloric Acid

Experimental and computational study of a multi-active-site Schiff base as corrosion inhibitor of mild steel in 1M HCl

Effectiveness of an amine-based inhibitor—guanidine for steel in chloride-contaminated concrete

Synergistic Inhibition Properties and Microstructures of Self-Assembled Imidazoline and Phosphate Ester Mixture for Carbon Steel Corrosion in the CO2 Brine Solution

Synthesis, characterization and evaluation of some anionic surfactants with phosphate group as a biodegradable corrosion inhibitor for carbon steel in acidic solution

Microscopic Influence Mechanisms of Polysaccharide on the Adsorption and Corrosion Inhibition Performance of Imidazoline on Metal Surface

Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution

Synthesis of a new class of corrosion inhibitors derived from natural fatty acid: 13‐Docosenoic acid amide derivatives for oil and gas industry

Synthesis and Characterization of a Novel Quaternary Ammonium Salt as a Corrosion Inhibitor for Oil-Well Acidizing Processes

Synthesis of a Hydroxyl-Containing Corrosion Inhibitor and Its Inhibitory Performance on N80 Steel in Hydrochloric Acid Solution

Study on corrosion and inhibition mechanism in H2S aqueous solutions - viii. The adsorption behavior of imidazoline derivates on the mild steel electrodes in H2S solutions

The inhibitor effect of migrating corrosion inhibitors on Q235 steel in high alkaline environment under cathodic polarization

The inhibition performance of heterocyclic compounds on Q235 steel in methanol/formic acid medium: Experimental and theory

Two α-aminophosphonics acids as corrosion inhibitors for carbon steel in 0.5 M HCl: Electrochemical and DFT/MD simulation.

Experimental and theoretical investigations of three Mannich-base imidazoline quaternary ammonium salts as efficient inhibitors for Q235 steel in sulfuric acid

STUDYING THE INFLUENCE OF NEW COMBINED INHIBITORS ON THE PROCESSES OF CORROSION AND SALT DEPOSITION IN OIL-FIELD EQUIPMENT