Abstract:Silicon-carbon composites (SCCs) represent a pivotal class of silicon-based negative electrode materials, exhibiting immense potential for commercial applications. The inclusion of carbon serves to restrict the expansion of silicon and establishes a reliable conductive framework. Pitch, as a carbonaceous precursor, can be utilized for the preparation of SCC exhibiting exceptional electrochemical performance. However, the structural and compositional variations in the carbon pyrolyzed from the pitch with varying softening points result in distinct impacts on the electrochemical properties of SCC, particularly their cycle performance. The coal tar pitch (CTP) with softening points of 80°C and 250°C was selected for synthesizing SCC in this research. The impact of utilizing CTP as a carbon source on the electrochemical performance of SCC and its accompanying structural modifications during cycling were investigated. The pyrolytic carbon with an enhanced graphitization level could be obtained from the CTP and exhibited a softening point of 250°C. The SCC prepared using this CTP revealed superior structural stability and electrochemical performance, with a specific capacity of 1413.4 mAh/g and a capacity retention rate of 76.70% after 100 cycles. The CTP with a softening point of 250°C was further combined with silicon and graphite composites and used as negative electrode materials. The initial reversible specific capacity of 546.1 mAh/g was demonstrated, and it maintained 93.53% of its capacity after 200 cycles. The CTP with a softening point of 250°C can be chosen for the preparation of SCC, ensuring excellent structural stability and electrochemical performance.

Study on the Performance of Carbon-Graphite Composite Coated by Pitch

Enhanced Rate Performance of Two-Phase Carbon Coated LiFePO4/(C+G) Using Natural Graphite As Carbon Source

Carbon-coated Si-Cu/graphite Composite As Anode Material for Lithium-ion Batteries

Electrochemical Characteristics of Pitch Coated Silicon/Graphite Anode Composites Using Surface Modification Process

Effect of pitch crystallinity on electrochemical performance of graphite carbon coatings

Modification mechanism of graphite anode in lithium-ion battery coated with ethylene tar pitch

Effect of coal tar pitch as carbon source on the electrochemical performance of silicon-carbon composites

Study Of Nano-Porous Si/Graphite/C Composite Anode Materials For Li-Ion Batteries

Influence of Particle Structure on Electrochemical Character of Composite Graphite

Effect of Carbonization Temperature on the Structure of Pitch Carbon and Its Low-temperature Lithium Storage Properties

Effect of Graphite Matrix on Property of Silicon/Carbon Composite Anode Material for Lithium-Ion Battery

Experiments and Modeling for Thermal Conductivity of Graphite Nanoplatelets/carbon Composites

Excellent Cyclic and Rate Performances of SiO/C/Graphite Composites As Li-Ion Battery Anode.

Modified Natural Flake Graphite with High Cycle Performance As Anode Material in Lithium Ion Batteries

Effect of Graphene on the Performance of Silicon–Carbon Composite Anode Materials for Lithium-Ion Batteries

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Synthesis and Electrochemical Performance of Silicon/Carbon Composite Anodes Through Ball Milling and Spray Drying Pyrolysis Process

Effect of the Structure of Pyrolytic Carbon on the Performance of LiFePO4/C Composite Cathode Material

Effect of graphene sheet and toluene-soluble component of pitch on the preparation, structure, and performance of LiMn0.8Fe0.2PO4@C@GNs

Scalable Synthesis of Pitch-Coated Nanoporous Si/Graphite Composite Anodes for Lithium-Ion Batteries

Cohesion and Toughness Improvement of Pitch Binder by Thermosetting Resin Modification for Tib2/C Composite Cathode