Abstract:Square wave alternating current (AC) tungsten inert gas (TIG) welding possesses great advantages in welding stability, quality, flexibility, and cost in manufacturing thin-walled propellant storage tanks with 2219-T6 aluminum alloy. To solve the welding engineering problem of 4 mm-thick plates made by square wave AC TIG welding, we conducted process optimization experiments and performed common microstructure analysis and mechanical property testing. Tensile strength and microhardness reaching 63.8 and 83.1% of the base material appear in the optimal weld. The dendrite morphology, grain size, and eutectic content of all welds were compared and analyzed with optical microscopic observation, image segmentation, and grayscale statistics. The obtained quantitative results interpret the macroscopic properties of the optimal weld from a microscopic perspective. Shallow and uniform equiaxed dimples, evident tearing ridges, and second-phase particles were detected in the tensile fractures. Reticular, granular, and lath eutectic ( α (Al) + CuAl 2 ) were found in the interior and boundaries of dendritic solid solution ( α (Al)). Unexpectedly, the epitaxial growth of the columnar grains was inconspicuous or absent in all welds. Uniform and fine equiaxed grains occupy almost all welds of different process parameters, while the G/R ratio of these welds reaches 15-23 °C·s/mm^2, under which the equiaxed crystals should not have formed. We attributed the grain refinement in these welds to the secondary phase particles in base metal. They are broken into fragments during the multi-pass rolling process of plates, remain semi-dissolved under a fast cooling rate, and provide adequate heterogeneous nuclei for melt solidification. A further SEM and EDS test to base metal and secondary phase particles confirmed our findings and speculations. These results suggest that in the molten pool with sufficient heterogeneous nucleation, the mechanical blocking effect of heterogeneous nucleation may interfere with the thermodynamic effect of welding heat input and speed on grain structure.

Optimality analysis of multiplex A-TIG welding flux for nickel-base superalloy

Mixed Fluxes for Nimonic263 Superalloy A-TIG Welding and Its Effect

Combination Effects of Nocolok Flux with Ni Powder on Properties and Microstructures of Aluminum-Stainless Steel TIG Welding-Brazing Joint

Effect of activating fluxes on weld mechanical properties in TIG welding

Effect of Weld Microstructure on Weld Properties in A-Tig Welding of Titanium Alloy

Multi-properties optimization of welding parameters of wire arc additive manufacture in dissimilar joint of iron-based alloy and nickel-based superalloy using grey-based Taguchi method

Effect of Activating Fluxes on Weld Properties During TIG Welding of Stainless Steel

Effect of Activating Fluxes on Weld Form in TIG Welding of Stainless Steel and Titanium Alloy

Effect of Activating Flux with Single Component on TIG Welding of Aluminium Alloy

Effects of Ni on microstructure and properties of aluminum- stainless steel TIG welding-brazing joint with AI-Si filler

Flux Modification For Ac-Tig Braze Welding Of Aluminium To Stainless Steel

Microstructure and High-Temperature Mechanical Properties of Inconel 718 Superalloy Weldment Affected by Fast-Frequency Pulsed TIG Welding

Marangoni convection and weld shape variation in A-TIG welding process

Mixed Mode Fatigue Crack Growth Behavior of Ni-Cr-Mo-V High Strength Steel Weldments

Research on Microstructure and Mechanical Properties of Square Wave Alternating Current Tungsten Inert Gas Welded Joints in 2219-T6 Aluminum Alloy

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

Influential Behavior Study of Fluxes during Activated Flux Tungsten Inert Gas Welding of IRSM 41 Steel

Penetration depth, phase balance and corrosion behaviour in activated TIG welding of UNS S32205

Novel Cast Ni‐based Superalloys with Superb Weldability and Mechanical Properties Screened by a Multi‐Performance‐Oriented Criterion

Characterization of microstructure and mechanical properties of nickel based superalloy 617 by pulsed current gas tungsten arc welding technique

Influence of cold metal transfer welding parameters on the welding hot crack of Mar-M247 nickel-based superalloy