Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Numerical simulation of powder heating and moving in plasma jet by lattice boltzmann method

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Numerical Modeling in Radio Frequency Suspension Plasma Spray of Zirconia Powders

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Simulation of Effervescent Atomization and Nanoparticle Characteristics in Radio Frequency Suspension Plasma Spray

Three-dimensional simulation of air entrainment in plasma jet and particle oxidation

Numerical Investigation of In-Flight Behavior of Fe-Based Amorphous Alloy Particles in AC-HVAF Thermal Spray Process

Three-dimensional simulation of plasma spray: effects of carrier gas flow and particle injection on plasma jet and entrained particle behavior

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

Three-Dimensional Simulation of Plasma Spray Jet

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Three Dimensional Numerical Analysis of Plasma Spraying Using Supersonic Plasma Gun

Numerical Study of Particle In-Flight Characteristics in a RF Induction Plasma Spray

Model and Powder Particle Heating, Melting, Resolidification, and Evaporation in Plasma Spraying Processes

Numerical Simulation of Radio Frequency Induction Plasma Spray Processing

The Analysis of Melting and Refining Process for In-Flight Particles in Supersonic Plasma Spraying

Modeling Of Particle In-Flight And Deposition During Plasma And Hvof Spraying

Numerical simulation of three cathode plasma spray torch

Effect of a Spatially Fluctuating Heating of Particles in a Plasma Spray Process

Three-Dimensional Numerical Simulation of High-Speed Shear Crushing of High-Density Fluid

Research Progress on Numerical Simulation of the Deposition and Deformation Behavior of Cold Spray Particles