Abstract:Atomization spray of non-Newtonian liquid plays a pivotal role in various engineering applications, especially for the energy utilization. To operate spray systems efficiently and well understand the effects of liquid rheological properties on the whole spray process, a comprehensive model using Euler-Lagrangian approaches was established to simulate the evolution of the atomization spray for viscoelastic liquid. Based on the Oldroyd model, the viscoelastic linear dispersion relation was introduced into the primary atomization; an extended viscoelastic version of Taylor analogy breakup (TAB) model was proposed; and the coalescence criteria was modified by rheological parameters, such as the relaxation time, the retardation time and the zero shear viscosity. The predicted results are validated with experimental data varying air-liquid mass flow ratio (ALR). Then, numerical calculations are conducted to investigate the characteristics of viscoelastic liquid atomization process. Results showed that the evolutionary trend of droplet mean diameter, Weber number and Ohnesorge number of viscoelastic liquids along with axial direction were qualitatively similar to that of Newtonian liquid. However, the mean size of polymer solution increased more gently than that of water at the downstream of the spray, which was beneficial to stable control of the desirable size in the applications. As concerned the effects of liquid physical properties, the surface tension played an important role in the primary atomization, which indicated the benefit of selecting the solvents with lower surface tension for finer atomization effects, while, for the evolution of atomization spray, larger relaxation time and zero shear viscosity increased droplet Sauter mean diameter (SMD) significantly. The zero shear viscosity was effective throughout the jet region, while the effect of relaxation time became weaken at the downstream of the spray field.

Modeling Of Particle In-Flight And Deposition During Plasma And Hvof Spraying

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Numerical Modeling in Radio Frequency Suspension Plasma Spray of Zirconia Powders

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Simulation of Effervescent Atomization and Nanoparticle Characteristics in Radio Frequency Suspension Plasma Spray

Model and Powder Particle Heating, Melting, Resolidification, and Evaporation in Plasma Spraying Processes

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Three-dimensional simulation of air entrainment in plasma jet and particle oxidation

Three-Dimensional Simulation of Plasma Spray Jet

An Advanced Ceramic Coating Buildup Model for Thermal Spray Processes

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Melting, Oxidation, Evaporation of Particle In-Flight in Plasma Spray Processes

Numerical Investigation of High Velocity Suspension Flame Spraying

The Analysis of Melting and Refining Process for In-Flight Particles in Supersonic Plasma Spraying

Numerical Modeling the Bonding Mechanism of HVOF Sprayed Particles

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Study of Turbulent Behavior and Particle Flight Characteristics Based on Different Turbulence Models During HVOF Spraying

Analysis of semi-molten hollow particle spreading and deformation in plasma spraying

Numerical Models For Viscoelastic Liquid Atomization Spray