Abstract:The study of the transformation of heavy metals during the coal combustion process is of great significance to controlling their emission. In this study, three coals with different contents of arsenic (As), lead (Pb), and mineral elements were selected. The experiments were conducted at 900-1300 degrees C using a drop tube furnace system. The transformation of As and Pb during the combustion processes of the three coals was obtained. It was found that both the gaseous and particulate phases were important forms of As and Pb in the combustion products. As the temperature increased, the proportion of gaseous-phase As of the YBS (Yuan Baoshan) coal and JT (Jing Tai) coal first increased and then decreased, and the proportion of gaseous-phase As of the HLH (Huo Linhe) coal increased slightly. As the temperature increased, the proportion of gaseous phase Pb of the three coals increased and reached approximately 65% at 1300 degrees C. For the particulate phase, As and Pb were mainly present in ultramicrometer particles after combustion. The differences in the three coal components caused the different distributions of As and Pb in the gaseous and solid combustion products. The coal with a high content of iron (Fe) and calcium (Ca) was more conducive to the migration of gaseous-phase As to solid-phase As during flue gas cooling, while the effects of Ca and sulfur (S) on Pb transformation in the coal were offset. The original modes of occurrence of As and Pb in the three coals were mainly organic-bound and residual forms. During the combustion process, the organic-bound As and Pb were completely released, the residual As and Pb were partially released, and small amounts of water-soluble and ion-exchangeable As and Pb were formed. The analysis of the distribution characteristics of As and Pb in the combustion products showed that the direct release ratios of As and Pb during high-temperature combustion were greater than 45%. During flue gas cooling, more than 60% of As and Pb in the submicrometer particle were produced by transformation from the gaseous phase to particulate phase.

Experimental Study on the Emission Characteristics of Lead During Combustion

Experimental study on particle size distributions of lead particulate matters during combustion

Measurement and Numerical Simulation of Ultrafine Particle Size Distribution in the Early Stage of High-Sodium Lignite Combustion

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Ultrafine particulate matter formation in the early stage of pulverized coal combustion of high-sodium lignite

Characteristics Of Submicron Particulate Matters Formed In The Early Stage Of Oxy-Fuel Coal Combustion

Study on the Mechanism of Lead Release from Ash under the Action of High-Temperature Flue Gas

Experimental Study on Lead Capture by Sorbents During Combustion

Morphology, Composition, and Mixing State of Primary Particles from Combustion Sources — Crop Residue, Wood, and Solid Waste

Emission characteristics of lead and particulate matter from lead and zinc smelters in China

Ash Aerosol Formation from Oxy-Coal Combustion and Its Relation to Ash Deposit Chemistry

Transformation Characteristics of Arsenic and Lead During Coal Combustion

Impact of Dilution Ratio and Burning Conditions on the Number Size Distribution and Size-Dependent Mixing State of Primary Particles from Domestic Solid Fuel Burning

A critical review on lead migration, transformation and emission control in Chinese coal‐fired power plants

Volatilisation Behaviour and Mechanism of Lead-Containing Slag during Physical Property Tests

Real time analysis of lead-containing atmospheric particles in Guangzhou during wintertime using single particle aerosol mass spectrometry

Transmission Electron Microscopy Study of Aerosol Particles from the Brown Hazes in Northern China

A Study of the Characteristics of Primary Particulate Matter after the Combustion of Pulverized Coal of Different Particulate Diameters

Study on the Transformation of Combustion Mechanism and Ejection Phenomenon of Aluminum Particles in Methane Flame

Experimental Study on PM10,PM2.5,PM1 Emission Features Influenced by Different Conditions in Pulverized Coal Combustion

Combustion of Aluminum Particles in a High-Temperature Furnace under Various O 2 /CO 2 /H 2 O Atmospheres