Abstract:In recent years, structural health monitoring has been paid more and more attention in bridge engineering community. Previous researches showed that ambient temperature was one of principal factors affecting structural modal parameters in long-term. In this paper, an experimental study on correlation between dynamic properties of a cable-stayed bridge and its structural temperature was performed under temperature controlled laboratory environment. Using hammer impacting method, a dynamic testing was conducted based on a steel cable-stayed bridge model which had a span layout of 0.9+1.9+0.9m. During the experiment, the first six vertical bending modes under the environmental temperature of 0, 20 and 40°C were identified with the consideration of three kinds of boundary conditions at the deck’s ends as to two degrees of freedom, i.e. the longitudinal translation (UX) and the rotation about the transverse beam (RotZ). The above boundary conditions are UX & RotZ not constrained, UX constrained only and UX & RotZ constrained, attempting to simulate the different conditions of the bridge expansion joints. The efforts were paid to explain the physical mechanism of the results based on the updated FE model. This experimental study indicates a tendency that the frequency of the cable-stayed bridge model decreases with the increase of temperature. And furthermore, the relative difference of frequencies between 0 and 40 °C is affected by boundary conditions; in other words, when the deck is free to expand, the variation of model’s frequencies is smaller than that when the deck is restrained to expand, which is similar to the condition of the bridge’s expansion joints cannot work as normal. This experimental study can give some reference to the research of SHM and damage identification for cable-stayed bridges.

Environmental variability in modal frequency identificationof Runyang Cable-Stayed Bridge

Environmental Variability in Modal Frequency Identification of Stay Cables of a Long-span Cable-stayed Bridge

Identification of Environmental Modal Frequencies Using Maximum Entropy Method for Long-span Cable-stayed Bridges

Research on correlation of modal frequency of long-span Bridge structures and environmental temperature

Quantitative evaluation of variability in modal frequencies of a suspension bridge under environmental conditions

Environmental variability of measured wavelet packet energy spectrum for Runyang suspension bridge

Analysis on Modal Frequency Variation of a Cable-Stayed Bridge Based on Monitoring Data

Variability Of Measured Modal Frequencies Of A Suspension Bridge Under Actual Environmental Effects

Environmental Effects on Modal Frequency of Long-Span Cable-Stayed Bridges

Modal Identification Of Runyang Cable-Stayed Bridge Using Ambient Response Record Of Shms

Environmental Variability Study on the Measured Responses of Runyang Cablestayed Bridge Using Wavelet Packet Analysis

Modal identification of long-span Runyang Bridge using ambient responses recorded by SHMS

Effect analysis of environmental factors on structural modal parameters of a cable-stayed bridge

Investigation of Dynamic Properties of Long-Span Cable-Stayed Bridges Based on One-Year Monitoring Data under Normal Operating Condition

Evaluations On Dynamic Behaviors And Its Environmental Influence Factors Of Bridge Based On Long Term Monitoring

Correlation Analysis of Large-Span Cable-Stayed Bridge Structural Frequencies with Environmental Factors Based on Support Vector Regression

Dynamic Property Evaluation of a Long-Span Cable-Stayed Bridge (Sutong Bridge) by a Bayesian Method

Correlation Study on Modal Frequency and Temperature Effects of A Cable-Stayed Bridge Model

Monitoring and warning of health conditions for suspension bridges under varying environmental conditions

Temperature Effects on Modal Frequencies of Long-Span Cable-Stayed Bridges

The Time-Varying Modal Information of a Cable-Stayed Bridge: Some Consideration for SHM