Toughness study on PVA fiber reinforced cementitious composites using total work done by horizontal load

Shuling Gao,Shilang Xu

DOI: https://doi.org/10.3321/j.issn:1001-0505.2007.02.028

2007-01-01

Abstract:The toughness of polyvinyl alcohol (PVA) fiber, glass fiber and steel fiber reinforced cementious composites, high strength concrete and high strength steel fiber reinforced concrete from wedge splitting experiment are discussed and compared in terms of the total work done by horizontal load which is composed of the enclosed area of horizontal load-crack mouth opening displacement curve concerning the gravity of clamp. The results show that brittle fracture occurs in matrix and the P-WCMOD (crack mouth opening displacement) curve is linear till loading to failure. Quasi-brittle fracture occurs in high strength (steel fiber reinforced) concrete and steel fiber, glass fiber reinforced cementitious composites, their P-WCMOD curves show a short nonlinear zone near the peak load. However, ductile fracture can be observed in PVA fiber reinforced cementitous composites (PVA-FRCCs) and their P-WCMOD curves show apparent pseudo strain-hardening phenomenon. For brittle and quasi-brittle materials, there is only one crack which penetrates the specimen starting from the notch tip. For ductile materials, multiple microcracks generate at the initial crack tip and then a main crack forms and penetrates the specimen. By comparing the total work done by horizontal load. it can be concluded that the toughness of PVA-FRCCs is the best, followed with steel fiber reinforced concrete and steel fiber reinforced cementitious composites in order, and the last is glass fiber reinforced cementitious composites.