Abstract:A single-polarization (SP) coupler based on air-core photonic bandgap fibers (PBFs) is proposed and numerically simulated. The physical mechanism is the decoupling phenomenon occurring at special separations between the cores of the dual-core PBFs called decoupling points. The coupling length of one polarization in the coupler tends to be infinite while the coupling length of other polarization remains in normal level. The coupling ratio for the primary polarization can vary by adjusting the length of the coupler since the other polarization is always decoupled out at any length of the coupler. When this novel SP coupler is incorporated into a PBFs based fiber ring resonator, its unique polarization property is theoretically simulated. In this full-PBFs configuration, the SP coupler functions as the power splitter and the polarizer simultaneously. By the finite element method, the feasibility of the SP coupler to filter the secondary eigenstate of polarization (ESOP) propagating in the resonator is proved. And the performance of the SP coupler to suppress the temperature-related polarization fluctuation in the resonant fiber optic gyro is promised to be more significant to the in-line polarizer integrating in the resonator. Furthermore, the mechanism of decoupling phenomenon in the SP coupler and the influence of polarization-axis angular misalignment are discussed. In conclusion, an optimized SP coupler can couple the primary ESOP properly, and a polarization extinct ratio larger than 30 dB can be achieved within the angular misalignment of 0.9 degree. The aforementioned unique properties make this novel SP coupler attractive for the resonant fiber optic gyro.

Propagation Properties Analysis of Fused Taper PANDA Fiber Couplers

Comparison of Fiber-to-Waveguide Couplers in Point Diffraction Interferometer Based on Waveguide Reference Wavefront Source

Improved model of fused tapered single-mode-fiber coupler

Novel fiber taper for efficient optical interconnection

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Transmission Performance Analysis of Fiber Optical Parametric Amplifiers for Wdm System

A Theoretical Investigation on Propagation Characteristics and Coupling Efficiencies of A Coupling System

Single-Polarization Coupler Based on Air-Core Photonic Bandgap Fibers and Implications for Resonant Fiber Optic Gyro

Novel tapered optical fiber coupler

Propagation Characteristic Analysis and Applications of Spatial Four-Waveguide System

Analysis of Power Transfer Characteristics Among Many Parallel Optical Fibers

Analysis of Thermal Property in Hollow-Core Polarization Maintaining Photonic Crystal Fibers

Analysis of a tunable single mode optical fiber coupler

Polarization-dependent Coupling in Twin-Core Photonic Crystal Fibers

Design and Analysis of Thermally Tunable Liquid Crystal Filled Hybrid Photonic Crystal Fiber Coupler

Experimental Study of Nonlinear Switching Characteristics of Conventional 2×2 Fused Tapered Couplers

Polarization Maintain Fiber Couplers with Novel Transmission Characteristics

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Cross-polarization Generation and Its Impact on Coupler Performance

Propagation Characteristics of Multi-Coating D-Shaped Optical Fibres

Propagation Characteristics of Twin-Hole Poling Optical Fibers