The application of thorium fuel in long-life core design

Yu Ganglin,Wang Kan,Huayun Y. Shen

2007-01-01

Abstract:null

What problem does this paper attempt to address?

Research on physics characteristics of thorium-based long-life reactor system

Ganglin Yu,Kan Wang

2009-01-01

Abstract:null
Physical Design of a Thorium Fuel-based Long Life Reactor Core

Kan Wang

2010-01-01

Abstract:The design objectives of a long life reactor include the high fuel burnup and full power natural circulation,which increases the difficulty of reactor physical design: a higher conversion ratio to achieve zero reactivity swing with burnup and increase the P/D ratio to achieve natural circulation.It is a hard mission for the U-Pu fuel long life reactor design.This paper describes a spent Pu-Thorium fuel and lead-bismuth coolant based long life core design,taking the advantages of thorium fuel in fast neutron spectrum.The MCBurn code is chosen to perform the physical calculations..
Study on physics characteristics of Th-U fuel in long-cycle core

Ganglin Yu,Kan Wang

2006-01-01

Abstract:Based on the investigation of recent development of the long-life small nuclear power systems in the world, this paper puts forward a new concept of building a long-life reactor core with Thorium-Uranium fuel and Lead-Bismuth coolant and conducts a series of research on the characteristics of the Th-U fuel. In the physics design of a long-life reactor, it is important to keep a small reactivity swing with burnup and a deep burnup core, as well as negative temperature and void reactivity coefficient. The program MCBurn are used in the calculation of a pin cell model with different initial driver fuel, p/d ratio, enrichment and fuel type to obtain some physical results such as neutron spectrum, the reactivity swing with burnup and initial conversion ratio, etc. Based on the analysis of these results, this paper concludes some physical requirements of a long-life reactor core and constructs a preliminary core design with some safety parameters such as void reactivity coefficient and other results.
Research on the Control System of Thorium-Based Long-Life Core

Yu Ganglin,Wang Kan

DOI: https://doi.org/10.1115/icone16-48674

2008-01-01

Abstract:In the thorium-based long-life reactor, the thorium-spent fuel plutonium mixed fuel and lead-bismuth coolant are used to design a fast neutron spectrum core. This paper studies the control system in the long-life core and gets some useful conclusion. The control system includes two parts: the central control rod and a peripheral control unit that surrounds the core. The paper studies the thickness of the absorber, which influences the neutron absorb capability and economy, and gives the relation between the thickness and the reactivity. A peripheral reflector is used in most small fast neutron spectrum critical equipment to control the reactivity. The paper discusses the absorber mode and the reflector mode in peripheral control unit design. The paper gives the final design details of the control system in the thorium-based long-life core reactor. The control system has high control efficiency and achieves the requirement of the long-life core.
The research of Pb208 coolant in thorium-based long life reactor

Ganglin Yu,Kan Wang

2010-01-01

Abstract:This paper introduce the thorium fuel based long-life reactor concept and its preliminary design. The Lead-Bismuth has been chosen as the coolant of the long-life reactor. Compare with the traditional heavy metal coolant such as Lead or Lead-Bismuth, the enriched Pb208 has some advantage in reactor physics and which will benefit the long-life core design. The research work on the pure Pb208 coolant and thorium fuel in fast spectrum has been done to verify the physical characteristic of Pb208 based on one fast reactor pin cell. The results show the application of Pb208 coolant will increase the system criticality and decrease the positive void reactivity coefficient in fast reactor design. We used the MCB and ORIGEN codes to perform calculation on the thorium-based long-life core model with Pb208 coolant, focus on the void coefficient in the center of the fast reactor. It can be concluded that the Pb208 will greatly improve the characteristics of the long-life core.
Research on Fuel Physical Characteristics in Small Long-Life Nuclear Power System

YU Gang-lin,WANG Kan

DOI: https://doi.org/10.3969/j.issn.0258-0926.2007.04.002

2007-01-01

Abstract:Based on the simple introduction of recent development status of the long-life small nuclear burnup and a deep burnup core.The Program MCNP and MCBurn are used in the calculation of a Pin cell model with different initial driver fuels,p/d ratios,enrichments and fuel types to obtain some results for ex-power systems in the world,this paper puts forward a new concept of building a long-life reactor core with Thorium-Uranium fuel and Lead-Bismuth coolant and conducts a series of research on the characteristics of the Th-U fuel.In the physics design of a long-life reactor,it is important to keep a small reactivity swing with ample neutron spectrum,the reactivity swing with burnup and initial conversion ratio,etc.On the analysis of these results,this paper concludes some physical requirements of a long-life reactor core and constructs a core design with some safety parameters such as void reactivity coefficient and other results.
Research on the Radioactivity of Thorium Fuel in Different Reactors

Yu Ganglin,Wang Kan

DOI: https://doi.org/10.1115/icone16-48671

2008-01-01

Abstract:It’s very important to estimate the mass and radiotoxicity of isotopes in spent fuel of thorium fuel cycle, which will benefit the application of the thorium fuel. Much research work has been done on the spent fuel and radioactivity of thorium-based fuel before, yet the difference in usage is always ignored. This paper studies the raise of isotopes in spent fuel of thorium-based fuel cycle in pressurized water reactors and fast neutron reactors, focus on the radioactivity level of actinides and fission products, the important nuclides which have long term radiological impact or give the highest contribution to the total dose on short term after different decay periods. The paper discuss the important nuclides in the measurement of thorium fuel burnup, the conclusion will benefit the actual application of thorium fuel.
Power Flattening Study of Ultra-Long Cycle Fast Reactor Using Thorium Fuel

Taewoo Tak,Youqi Zheng,Deokjung Lee,T. K. Kim

DOI: https://doi.org/10.1002/er.3552

IF: 4.6

2016-01-01

International Journal of Energy Research

Abstract:This paper presents a design study of power shape flattening for an optimized ultra-long cycle fast reactor with a power rate of 1000 MWe in order to mitigate the power peaking issue and improve the safety with a lower maximum neutron flux and reactivity swing. There are variations in the core designs by loading thorium fuel or zoning fuels in the blanket region and the bottom driver region of ultra-long cycle fast reactor with a power rate of 1000 MWe. While it has lower breeding performance in a fast breeder reactor, thorium fuel is one of the promising fuel options for future reactors because of its abundance and its safety characteristics. It has been confirmed that the thorium fuels, when loaded into the center region of a reactor core, lower the power peaking factor from 1.64 to 1.25 after 20 years and achieves a more flattened radial power distribution. This consequently reduces the maximum neutron flux and the speed of the active core moving from 3.0 cm/year to 2.5 cm/year on the average over the 60-year reactor operation. It has been successfully demonstrated that the three-zone core is the most optimized core, has the most flattened radial power shape, and is without any compromise in the nature of long cycle core, from the neutronics point of view, in terms of average discharge burnup and breeding ratio. Copyright © 2016 John Wiley & Sons, Ltd.
Study on Fuel Selection for a Long-Life Small Lead-Based Reactor

Gan Huang,Chao Yang,Jichong Lei,Lingling Su,Zhenping Chen,Tao Yu

DOI: https://doi.org/10.3390/su142416840

IF: 3.9

2022-01-01

Sustainability

Abstract:The choice of an appropriate fuel can effectively prolong the refueling cycle of a reactor core. The Th-U cycle and U-Pu cycle are commonly used fuel breeding cycles. Oxide fuels, nitride fuels, and metal fuels are the primary candidate fuels for lead-based reactors. For fuel selection, a core model of a 60 MWt reactor was established. The results show that the breeding performance of the breeding fuel Th-232 is better than that of U-238, and the driving performance of the driving fuel Pu-239 is better than that of U-235. Therefore, PuO2-ThO2, PuN-ThN, and Pu-Th-Zr fuels may have good performance. By comparing the reactivity loss of three types of fuel, it was found that the reactivity loss of PuN-ThN fuel is the smallest. Hence, using PuN-ThN fuel as a core fuel can result in a longer refueling cycle. On this basis, PuN-ThN fuel was used in the preliminary design of the 120 MWt core physical model. It can be seen that when PuN-ThN fuel is used as the core fuel, a smaller reactivity swing (1408 pcm), smaller power peak factor, and super long refueling cycle (more than 30 years) can be obtained.
A Simplified Supercritical Fast Reactor with Thorium Fuel

Peng Zhang,Kan Wang,Ganglin Yu

DOI: https://doi.org/10.1155/2014/405654

IF: 0.849

2014-01-01

Science and Technology of Nuclear Installations

Abstract:Super-Critical water-cooled Fast Reactor (SCFR) is a feasible option for the Gen-IV SCWR designs, in which much less moderator and thus coolant are needed for transferring the fission heat from the core compared with the traditional LWRs. The fast spectrum of SCFR is useful for fuel breeding and thorium utilization, which is then beneficial for enhancing the sustainability of the nuclear fuel cycle. A SCFR core is constructed in this work, with the aim of simplifying the mechanical structure and keeping negative coolant void reactivity during the whole core life. A core burnup simulation scheme based on Monte Carlo lattice homogenization is adopted in this study, and the reactor physics analysis has been performed with DU-MOX and Th-MOX fuel. The main issues discussed include the fuel conversion ratio and the coolant void reactivity. The analysis shows that thorium-based fuel can provide inherent safety for SCFR without use of blanket, which is favorable for the mechanical design of SCFR.
Preliminary study on thorium-uranium fuel cycle in the equilibrium core of PWR

SHI Xiu-an,HU Yong-ming,LIU Zhi-hong,ZHOU Zhi-wei,ZHANG Jia-hua,BAO Bo-rong

2007-01-01

Abstract:Physical analysis systems,WIMSD5-SN2-CYCLE3D and CASMO3-CYCLE3D,are established for study of thorium-uranium fuel cycle.PWR of Daya Bay Unit 1 is selected as a referenced reactor type,and a new assembly including 36 thorium dioxide elements and 4.2% enriched 235U is designed without change of physical dimension and structural materials of assembly and core.Neutronic calculation and analysis is done on thorium assembly and uranium assembly of 3.2% enriched 235U.The refueling simulation and analysis of initial fuel cycle to the equilibrium uranium-plutonium fuel cycle is done on Daya Bay PWR core with 12 months refueling period.Then from the equilibrium uranium-plutonium fuel cycle,thorium assemblies are placed in the core to replace uranium assemblies.And the refueling process from the equilibrium uranium-plutonium fuel cycle to the equilibrium thorium-uranium fuel cycle is simulated and analyzed.The calculation results show that total fissile nuclides' consumption of every day of the equilibrium thorium-uranium cycle is decreased by 18.4% than that of the equilibrium uranium-plutonium cycle,and long-life radioactive nuclear waste is reduced.But the cycle length of the equilibrium thorium-uranium cycle is reduced by about 90 EFPD than that of the equilibrium uranium-plutonium cycle,which will shorten the refueling period and increase operating cost.Moreover,it will cause great difficulty for fuel management,safety control and disposal of spent fuel.235U enrichment of assemblies is proposed to improve for utilization of thorium in PWR.
ICONE19-43519 Preliminary Research on Thorium-Uranium Fuel Cycle Characteristic in PWR

chunlin wei,xiuan shi,yongwei yang,zhiwei zhou

DOI: https://doi.org/10.1299/jsmeicone.2011.19._icone1943_209

2011-01-01

The Proceedings of the International Conference on Nuclear Engineering (ICONE)

Abstract:Physical analysis program, WIMSD5- SN2- CYCLE3D and CASMO3-CYCLE, are established for study on thorium-uranium fuel cycle. Unit one of Daya Bay PWR is used as referenced reactor model. New assembly including 4.2% enrichment U-235 elements and 36 thorium dioxide elements is designed without change of physical dimension and structural materials of assembly and core. Neutronic calculation is done on thorium-based assembly and uranium-based assembly with 3.2% U-235 enrichments. The process of initial fuel cycle to the equilibrium uranium-plutonium fuel cycle on Daya Bay PWR core with 12 months refueling period is simulated. Then with initial condition of equilibrium uranium-plutonium fuel cycle, thorium-based assemblies are placed in the core to replace uranium-based assemblies in batches, and the refueling process from the equilibrium uranium-plutonium fuel cycle to the equilibrium thorium-uranium fuel cycle is simulated and analyzed. The calculation results show that total fissile nuclides' consumption every day of the equilibrium thorium-uranium cycle is decreased by 18.4% than that of the equilibrium uranium-plutonium cycle, and long-life radioactive nuclear waste is reduced. Meanwhile, the cycle length of the equilibrium thorium-uranium cycle is reduced by about 90 EFPD than that of the equilibrium uranium-plutonium cycle, which will shorten the refueling period and increase operating cost. Moreover, it will bring great difficulty of fuel management, safety control and disposal of spent fuel. U235 enrichment is proposed to improve for utilization of thorium in PWR.
Coupled Neutronics/Thermal Hydraulics Evaluation for Thorium Based Fuels in Thermal Spectrum Scwr

Khurrum Saleem Chaudri,Wenxi Tian,Guanghui Su,Suizheng Qiu

DOI: https://doi.org/10.1016/j.pnucene.2013.05.004

IF: 2.461

2013-01-01

Progress in Nuclear Energy

Abstract:Thorium can supplement the current limited reserves of uranium. In current study, analyses are performed for thorium based fuels in thermal neutron spectrum Super Critical Water Reactor (SCWR). Thorium based fuels are studied in two roles. First role being replacement of conventional uranium dioxide fuel while the other being burner of Reactor Grade Plutonium (RG-Pu) in thermal neutron spectrum SCWR. Coupled neutron physics/thermal hydraulics analyses are performed due to large density variation of coolant over the active fuel length. Analyses reveal that thorium-uranium MOX fuels lead to smaller burnup values as compared to equivalent enriched uranium dioxide but possess the advantage of smaller excess reactivity at Beginning of Life (BOL). This can lead to savings in the form of Burnable Poisons (BP). Smaller fuel average temperature values are obtained for thorium-uranium MOX fuels as compared to uranium dioxide fuel option. Coated fuel option utilizing mixed thorium-uranium mono nitride fuel can help further decrease fuel average temperature values for thorium based fuels. U-233, produced in thorium uranium fuels, contribution towards fission energy produced is smaller as compared to plutonium produced in conventional uranium dioxide fuel. In terms of proliferation resistance, approximately 40% less quantity of plutonium is produced for thorium-uranium MOX fuels (for studied compositions) as compared to equivalent enriched uranium dioxide fuel. But, there is not much difference between the discharged plutonium vector compositions. Thorium–Plutonium based fuels lead to significantly harder spectrum which results in larger spread in radial power density and eventually causes larger values for thermal hydraulic parameters like fuel and clad temperature. Due to almost no production of plutonium, thorium based fuels can be a very good option to burn RG-Pu in thermal spectrum SCWR. Thorium based fuels destroyed almost 74% initially loaded RG-Pu as compared to 60% for uranium based MOX. HEU based thorium fuels can be a very good option for replacing conventional uranium dioxide fuels as very small quantities of plutonium is produced. This option, although, has regulatory issues due to use of HEU material.
Ex‐core transition to thorium cycle in a small modular heavy‐water moderated molten salt reactor with unchanged concentration of heavy metal nuclides in the fuel salt

Yapeng Zhang,Jianhui Wu,Jingen Chen,Xiangzhou Cai

DOI: https://doi.org/10.1002/er.6574

IF: 4.6

2021-02-25

International Journal of Energy Research

Abstract:<section class="article-section__content">Ex‐core transition to thorium fuel cycle is an effective way to address the issue of the lacking of the 233U in nature. It consists to extract online the thorium bred 233Pa from the core and store it outside. The obtained 233Pa stockpile will decay into the 233U (T1/2 = 27 days), and when enough 233U is cumulated, a new 233U‐based reactor can be loaded. However, this approach will inevitably provoke the heavy nuclides (HN) concentration in the core during the extraction operation, which would affect the chemical stability of fuel salt and subsequently endanger the safety of the core operation. In this study, an improved ex‐core transition with unchanged HN concentration is proposed for a 500‐MWth small modular heavy‐water moderated molten salt reactor (SM‐HWMSR). To achieve this, two operating stages are needed. In the first stage, transuranic (TRU) from the spent fuel of LWRs is used to feed the low enrichment uranium (LEU, 19.75 wt% 235U/U) started core with 300 operating days to ensure negative temperature reactivity coefficient (TRC). In the second stage, the thorium bred 233U from the first stage is mixed with TRU to refuel the core. The proposed ex‐core transition scheme aims to burn TRU, meanwhile breed 233U to start new MSRs. The fuel cycle performance over 60‐years' operation is analyzed. The results demonstrate that it is possible to realize ex‐core transition with unchanged concentration of HN in the fuel salt. As the fraction of 233U in the mixed fuel is set to be 15 mol%, it only takes 3 years to start a new reactor with the stored 233U. The radiotoxicity of TRU‐based fuel is decreased after 60 years' burning in the SM‐HWMSR core. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3>"Ex‐core transition to thorium cycle in an SM‐HWMSR with unchanged concentration of heavy metal nuclides in the fuel salt" was investigated by Yapeng Zhang, Jianhui Wu, Jingen Chen, and Xiangzhou Cai. The results demonstrate that it is possible to realize ex‐core transition with unchanged concentration of HN in the fuel salt. As the fraction of 233U in the mixed fuel is set to be 15 mol%, it only takes 3 years to start a new reactor by the stored 233U. </section>

energy & fuels,nuclear science & technology
Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

Xuzhong Kang,Guifeng Zhu,Jianhui Wu,Rui Yan,Yang Zou,Yafen Liu

DOI: https://doi.org/10.3390/jne5020012

2024-05-10

Journal of Nuclear Engineering

Abstract:The lifespan of core graphite under neutron irradiation in a commercial molten salt reactor (MSR) has an important influence on its economy. Flattening the fast neutron flux (≥0.05 MeV) distribution in the core is the main method to extend the graphite irradiation lifespan. In this paper, the effects of the key parameters of MSRs on fast neutron flux distribution, including volume fraction (VF) of fuel salt, pitch of hexagonal fuel assembly, core zoning, and layout of control rod assemblies, were studied. The fast neutron flux distribution in a regular hexagon fuel assembly was first analyzed by varying VF and pitch. It was demonstrated that changing VF is more effective in reducing the fast neutron flux in both global and local graphite blocks. Flattening the fast neutron flux distribution of a commercial MSR core was then carried out by zoning the core into two regions under different VFs. Considering both the fast neutron flux distribution and burnup depth, an optimized core was obtained. The fast neutron flux distribution of the optimized core was further flattened by the rational arrangement of control rod channels. The calculation results show that the final optimized core could reduce the maximum fast neutron flux of the graphite blocks by about 30% and result in a more negative temperature reactivity coefficient, while slightly decreasing the burnup and maintaining a fully acceptable core temperature distribution.
Review of thorium-containing fuels in LWRs

Maria Hendrina Du Toit,Frederik Van Niekerk,Shervineh Amirkhosravi

DOI: https://doi.org/10.1016/j.pnucene.2024.105136

IF: 2.461

2024-03-13

Progress in Nuclear Energy

Abstract:Stemming from a renewed interest in the suitability of thorium as fertile isotope, this study presents an extensive survey of some of the recent advances on the use of thorium in light water reactors, with the view of informing researchers and policy makers. The isotopic properties of fertile and fissile material are discussed, with an emphasis on the suitability and unique characteristics of thorium. The overview is categorized in terms of fuel design, moderation, neutronic behaviour, thermal-hydraulics, fuel performance, radiotoxicity and proliferation. A brief scoping of varying perspectives on the economics of thorium in various fuel designs and applications in open and closed cycles, long residence fuel and fleet applications is presented. In conclusion, a high-level explanation of dominating factors, rendering various (often divergent) outcomes, is attempted, based on first principles.

nuclear science & technology
Core design study of a supercritical light water reactor with double row fuel rods

Chuanqi Zhao,Hongchun Wu,Liangzhi Cao,Youqi Zheng,Jue Yang,Yong Zhang

2012-01-01

Abstract:An equilibrium core for supercritical light water reactor has been designed. A novel type of fuel assembly with dual rows of fuel rods between water rods is chosen and optimized to get more uniform assembly power distributions. Stainless steel is used for fuel rod cladding and structural material. Honeycomb structure filled with thermal isolation is introduced to reduce the usage of stainless steel and to keep moderator temperature below the pseudo critical temperature. Water flow scheme with ascending coolant flow in inner regions is carried out to achieve high outlet temperature. In order to enhance coolant outlet temperature, the radial power distributions needs to be as flat as possible through operation cycle. Fuel loading pattern and control rod pattern are optimized to flatten power distribution at inner regions. Axial fuel enrichment is divided into three parts to control axial power peak, which affects maximum cladding surface temperature.
PRELIMINARY NEUTRONICS AND THERMAL-HYDRAULICS STUDY ON THORIUM BASED HTR-PM WITH OUTER BREEDING ZONE

Qiudong Wang,Bing Xia,Jiong Guo,Ding She,Lei Shi,Zuoyi Zhang

DOI: https://doi.org/10.1115/icone26-81975

2018-01-01

Abstract:In this work, a two-zone reactor core, which contains an inner driving zone and an outer ThO2 breeding zone, is designed under the framework of the HTR-PM. The main aim of this work is to investigate the feasibility of thorium utilization in the mature design of the HTR-PM with the inherent safety features. The neutronics and thermal-hydraulics characteristics are investigated to optimize the design parameters by using VSOP. The aim of optimization is to maximize the conversion of thorium to 233U in the breeding zone. The preliminary results indicate that the volume ratio of the breeding zone to the driving zone has significant influence on the power peaking factor and the maximum fuel temperature in normal operation and accidental conditions. On the other hand, the increase of reactor power will lead to increase of maximum fuel temperature after DLOFC accident. More heavy metal loading in the breeding zone will raise 233U yield, while the influence of fuel particle radius on the conversion ratio is negligible. An optimized 200 MWt two-zone reactor design is obtained with volume ratio of the driving zone to the breeding zone of 4:1, and 7 g and 30 g heavy metal per fuel sphere in the driving zone and the breeding zone, respectively.
Coupled Analysis of Thorium-based Fuels in the High-Performance Light Water Reactor Fuel Assembly

Y. Pérez,C. R. García,F. L. Mena,L. Castro

DOI: https://doi.org/10.17146/aij.2021.1081

2021-08-10

Atom Indonesia

Abstract:One of the six selected concepts to be part of Generation IV nuclear reactors is the Supercritical Light Water Cooled Reactor. The High-Performance Light Water Reactor (HPLWR) is the European version and it is a very promising design. In recent years, interest in the study of thorium-based fuel cycles has been renewed and its possibilities for current LWRs have been evaluated. The use of thorium-based fuels will be fundamental in the future sustainability of nuclear energy, since in addition to its abundance in nature, thorium has an important group of advantages. In this paper, performance of thorium-based fuels in the typical fuel assembly of the HPLWR reactor is evaluated, using a computational model based on CFD and Monte Carlo codes for the neutronic/thermal-hydraulic coupled analysis. The volumetric power density profiles, coolant temperature profiles, fuel temperature profiles and others are compared with those obtained for standard UO 2 fuel. When the thorium-based fuels are used, the obtained infinite multiplication coefficients are smaller than the value obtained when UO 2 is used, since the 232 Th isotope has a lower contribution to the multiplicative properties of the medium than 238 U. As a result, a difference of approximately 12 000 pcm was observed. The results verified that the HPLWR is a thermal reactor with a hard spectrum. There are no notable changes in the neutron spectrum if the mass fraction of thorium is slightly varied. With coupled analysis, the potential benefits of the utilization of thorium-based fuels were verified. Moreover, a significant temperature decrease by 136 K on the center line of the fuel elements was observed. When the mass fraction of thorium increases in the oxides mixture, the weighted average temperature on the fuel elements decreases .
Theoretical and numerical studies of TWR based on ESFR core design

dalin zhang,xuenong chen,michael flad,andrei rineiski,werner maschek

DOI: https://doi.org/10.1016/j.enconman.2013.01.037

IF: 10.4

2013-01-01

Energy Conversion and Management

Abstract:•The traveling wave reactor (TWR) is studied based on the core design of the European Sodium-cooled Fast Reactor (ESFR).•The conventional fuel shuffling technique is used to produce a continuous radial fuel movement.•A stationary self sustainable nuclear fission power can be established asymptotically by only loading natural or depleted uranium.•The multi-group deterministic neutronic code ERANOS is applied.

The application of thorium fuel in long-life core design

Research on physics characteristics of thorium-based long-life reactor system

Physical Design of a Thorium Fuel-based Long Life Reactor Core

Study on physics characteristics of Th-U fuel in long-cycle core

Research on the Control System of Thorium-Based Long-Life Core

The research of Pb208 coolant in thorium-based long life reactor

Research on Fuel Physical Characteristics in Small Long-Life Nuclear Power System

Research on the Radioactivity of Thorium Fuel in Different Reactors

Power Flattening Study of Ultra-Long Cycle Fast Reactor Using Thorium Fuel

Study on Fuel Selection for a Long-Life Small Lead-Based Reactor

A Simplified Supercritical Fast Reactor with Thorium Fuel

Preliminary study on thorium-uranium fuel cycle in the equilibrium core of PWR

ICONE19-43519 Preliminary Research on Thorium-Uranium Fuel Cycle Characteristic in PWR

Coupled Neutronics/Thermal Hydraulics Evaluation for Thorium Based Fuels in Thermal Spectrum Scwr

Ex‐core transition to thorium cycle in a small modular heavy‐water moderated molten salt reactor with unchanged concentration of heavy metal nuclides in the fuel salt

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

Review of thorium-containing fuels in LWRs

Core design study of a supercritical light water reactor with double row fuel rods

PRELIMINARY NEUTRONICS AND THERMAL-HYDRAULICS STUDY ON THORIUM BASED HTR-PM WITH OUTER BREEDING ZONE

Coupled Analysis of Thorium-based Fuels in the High-Performance Light Water Reactor Fuel Assembly

Theoretical and numerical studies of TWR based on ESFR core design