Abstract:Friction is not considered in the calculation of load capacity for spiral bevel gears according to either ISO or AGMA gear standard, and friction effects on the bending, contact and shear of the gears have rarely been discussed. In this regard, the present work establishes analytical solutions to calculate bending and contact strength for spiral bevel gears incorporating friction on the tooth surface, which are verified by ISO gear standard and finite element method (FEM). The bending strength is calculated based on Lewis cantilever beam approximation, utilizing the modified normal force and the friction component. The modified normal force is derived at the highest point of single tooth contact (HPSTC) in the normal equivalent gear. Follow Hertz contact theory, the contact strength is calculated when the modified normal force and the friction component are exerted at the lowest point of single tooth contact (LPSTC) in the normal equivalent gear. The calculated bending and contact stresses agree well with those obtained from the FEM analysis while considering the influence of friction. Both theoretical predictions and FEM analysis have shown that friction has a crucial effect on load capacity of a spiral bevel gear drive, and that it exerts stronger influence on the bending strength (compared with the contact strength). When friction coefficients become larger (with the same input torque), the bending stress considering only the modified normal force decreases at HPSTC, whereas it increases if both the modified normal force and the friction component are included. In comparison, the contact stress will increase at LPSTC under both scenarios. Furthermore, it is illustrated that shear strength check of the tooth is necessary as large friction occurs in the contact zone. This developed analytical solution can be well applied tothe determination of load capacity of spiral bevel gears, especially under harsh working conditions or in the demand for higher performance. (C) 2017 Elsevier Ltd. All rights reserved.

Analysis of Tooth Root Bending Stress for Spiral Bevel Gears

Analytical Solution to Bending and Contact Strength of Spiral Bevel Gears in Consideration of Friction

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Theoretical and Experimental Study on Contact Characteristics of Spiral Bevel Gears under Quasi-Static and Large Loading Conditions

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

Theoretical and experimental research on tooth root bending stress of face gear

Calculation methods of load distribution ratio for spiral bevel gear

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

A Novel Analytical Method for Meshing Characteristics of Spiral Bevel Gears Considering Slice Coupling

Tooth Contact Analysis of Involute Gear

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

Computerized Design and Analysis of Face-Milled, Uniform Tooth Height Spiral Bevel Gear Drives

Optimized Face Gear and Its Bending Stress Analysis

Research on the Strength Calculation Method and Effects of Gear Parameters for High-Coincidence High-Tooth Gears

Research on Method of Solid Modeling and Tooth Surface Shape Evaluating for Spiral Bevel Gear

An Analytic Calculation Method for the Tooth Root Bending Stress of Asymmetric Plastic Gear

Contact Analysis for Spiral Bevel Gear Based on Machine Parameters

The Stress Analysis on Spur Gear Meshing Simulation

Study on the effect of tooth blank parameters on mesh behavior of aviation bevel gear considering thin web and narrow rim structure

Contact stresses and bending stresses analysis of curvilinear cylindrical gears generated by a face-milling cutter with parabolic profile

Semi-analytical Loaded Tooth Contact Analysis Method for Spiral Bevel Gears